Time not updated

[redrobin]

The time on my receiver hasn't updated since the clocks went forward, the time settings are Europe, London and Transponder time.

Can the time be adjusted manually, or is it a case of wait and see.

ps. tried making this post from my tablet and it failed as i couldn't set a category

 

[joysleep1]

The same thing has happened with ultimo 4k. I thought it would change itself.

 

[nigel_p]

Same here on my Zgemma, changed location to Belfast from London as a temporary fix

 

[spanner123]

Same here on my Solo2 using NTP time setting

 

[bellejt]

on both vu duo2 location brussels all has gone fine.Adjusted automatically at 2 o'clock this night.

 

[dsayers]

Timezone area Generic
Timezone GB-Eire

Seems to be correct but using Europe with London timezone doesn't seem to update

 

[^^COMPASS^^]

I noticed once the change has been applied London doesn’t appear to be present in the list of Timezones

 

[dsayers]

I noticed once the change has been applied London doesn’t appear to be present in the list of Timezones

Yea just checked after you posted change Timezone area back to Europe and London is default but switch left or right and London is no longer available to select

 

[spanner123]

I noticed once the change has been applied London doesn’t appear to be present in the list of Timezones

I found if you go to Generic and then back to Europe,then London re-appears.

 

[IanSav]

Hi Guys,

This problem could be explained if your receivers do not have the latest time zone control files. If you have or know anyone having time zone issues please advise then to connect to their receiver via telnet and run the following command:

opkg install --force-reinstall tzdata tzdata-core tzdata-europe

for users not in Europe you can add or substitute the following options for "tzdata-europe" to expand the correction to your area of the world:

tzdata-africa
tzdata-americas
tzdata-antarctica
tzdata-arctic
tzdata-asia
tzdata-atlantic
tzdata-australia
tzdata-europe
tzdata-misc
tzdata-pacific

This command should reinstall the updated and complete time zone data for your area. Once you run this update you should find all the missing locations available in the list of time zones on your receiver.

Regards,
Ian.

 

[dsayers]

Hi Guys,

This problem could be explained if your receivers do not have the latest time zone control files. If you have or know anyone having time zone issues please advise then to connect to their receiver via telnet and run the following command:

for users not in Europe you can add or substitute the following options for "tzdata-europe" to expand the correction to your area of the world:


This command should reinstall the updated and complete time zone data for your area. Once you run this update you should find all the missing locations available in the list of time zones on your receiver.

Regards,
Ian.

Thats worked. Thanks

 

[abu baniaz]

Might be an idea to download latest image, flash it, and restore plugins and settings if the above command does not work. Whole process will take less than 5 minutes. All using remote, no PC required.

For information:
I was on Dev, time updated at 01:00 in the morning. i.e became 02:00.

I just flashed release 019. The time was correct at the first install Wizard. I restored settings and plugins, and I can't replicate the problems being reported.

 

[spanner123]

Might be an idea to download latest image, flash it, and restore plugins and settings if the above command does not work. Whole process will take less than 5 minutes. All using remote, no PC required.

For information:
I was on Dev, time updated at 01:00 in the morning. i.e became 02:00.

I just flashed release 019. The time was correct at the first install Wizard. I restored settings and plugins, and I can't replicate the problems being reported.

I was already on 019 and time did not update. All ok after IanSav update.

 

[abu baniaz]

I was already on 019 and time did not update. All ok after IanSav update.

Are you saying the first image you flashed on receiver was 019? If that is not what you are saying, what image were you on before you got to 019. How did you then get to 019?

I am sure Timezone files did not update properly or replace existing files properly, but fine on image with newer files.

 

[ccs]

My ET10K was fine - regular couch flash updates of pretty much every release since the year dot.

 

[spanner123]

Are you saying the first image you flashed on receiver was 019? If that is not what you are saying, what image were you on before you got to 019. How did you then get to 019?

I am sure Timezone files did not update properly or replace existing files properly, but fine on image with newer files.

I was on 018 and did an update.

 

[abu baniaz]

My ET10K was fine - regular couch flash updates of pretty much every release since the year dot.

You cannot "couch flash update". There is no such thing. The term you are using a is a combination of two different processes. From past discussion I know what you mean, but others will not appreciate the difference.

People can do one of following

• flash latest image and optionally restore settings and plugins afterwards. Flash using Image Manager (couch flash) or flash using USB.
• perform an update

 

[abu baniaz]

I was on 018 and did an update.

The two options to resolve the problem have been listed. I note your indication that you have run the re-install command
1. Issue the command in post 10 to reinstall the timezone files. There is a guide to using Putty here:

https://www.world-of-satellite.com/showthread.php?40948-How-to-use-Putty-for-Unix-Linux-commands

2. Flash 019 and restore settings/plugins afterwards. Guide to flash and restore here (You can ignore create a settings backup stage as that is automated):

https://www.world-of-satellite.com/showthread.php?47588-Flashing-Settings-backup-and-Restores/

 

[nekrub2]

Flashed VU+ solo2 5.3.019 from USB stick yesterday and restored 5.3.018 settings and plugins. Time settings Europe Zurich - time switched correctly today.

 

[icemen]

Was on latest image, time didn't update today on my vu solo2. Ran command from IanSav via telnet, reboot and boom! All good again thankz guyz