[VU+ Ultimo4K] openvix 6 0 001 - settings backup doesn't install

[twol]

So I have just flashed my H9S box with ViX 6.0.001 without any issues, but not used a settings backup.
Can you try the same - flash image no setting restore

 

[malcolmp]

Downloaded new image, seems OK now. Thanks

 

[rte]

So I have just flashed my H9S box with ViX 6.0.001 without any issues, but not used a settings backup.
Can you try the same - flash image no setting restore

I would rather avoid starting from the scratch. I had no peculiar plugins except ymod oscam inactivated. I have removed all those files. That might have caused the error. I wonder if my skin is too much for 6.0.001?

 

[rte]

I have installed enigma2-plugin-picons-snp-full.400x240-400x240.light.on.transparent_2021-01-04--23-56-42_all.ipk
with a collection of 28546 picons 1 Kb each included in my backup. No memory overflow even close. Could that be a problem?

 

[spevs]

Hi, I have upgraded to open vix 6 from 5.4.016 and all previous setting seem to have come across ok, but I get an error trying to install xtremeditor "enigma2-plugin-extensions-xeaio_3.0.6_all.ipk" from local extension, this has not been a problem on previous images.

Anyone have any ideas....?

 

[rte]

Hi, I have upgraded to open vix 6 from 5.4.016 and all previous setting seem to have come across ok, but I get an error trying to install xtremeditor "enigma2-plugin-extensions-xeaio_3.0.6_all.ipk" from local extension, this has not been a problem on previous images.

Anyone have any ideas....?

My conclusion is that local extensions not included in the standard extension list are tough bites för 6.0.001. These could be excluded from the settings backup. I have not tried that yet.

 

[twol]

Hi, I have upgraded to open vix 6 from 5.4.016 and all previous setting seem to have come across ok, but I get an error trying to install xtremeditor "enigma2-plugin-extensions-xeaio_3.0.6_all.ipk" from local extension, this has not been a problem on previous images.

Anyone have any ideas....?

@rte is correct, if its not in the normal downloads in plugins then its likely to have issues with python3.(OpenViX 6.0 or OpenATV 7.0)

 

[twol]

I have installed enigma2-plugin-picons-snp-full.400x240-400x240.light.on.transparent_2021-01-04--23-56-42_all.ipk
with a collection of 28546 picons 1 Kb each included in my backup. No memory overflow even close. Could that be a problem?

depends where you are storing the picons.

 

[spevs]

Hi Guys thanks for the comments, I don't mind how I get Xtremeditor installed on my box it's just how I get access to my IPTV on my Vu+ Uno4K SE. Any ideas would be greatly appreciated...............Spevs

 

[twol]

Hi Guys thanks for the comments, I don't mind how I get Xtremeditor installed on my box it's just how I get access to my IPTV on my Vu+ Uno4K SE. Any ideas would be greatly appreciated...............Spevs

somewhere you have a url to the web site and userid & password - you can use that on most IPTV plugins e.g. IPTV Bouquet Maker

 

[spevs]

Hi Twol, thanks for your help with this. Is there a way Xtremeditor can be made available to install from Plugins. On my box using any image before Vix 6 I have been able to install it as Local Extension from Temp folder.

 

[twol]

Hi Twol, thanks for your help with this. Is there a way Xtremeditor can be made available to install from Plugins. On my box using any image before Vix 6 I have been able to install it as Local Extension from Temp folder.

Not until somebody makes it run on python3

If I knew where the source was it would help ….. but they probably want to keep their users locked in!

 

[rte]

I have finally made it. Thank you for the instructions. I moved my picon directory from root to hdd (SSD) and cleaned my backup selection. No suspicous extensions left. Then I flashed to 6.0.001 smoothly without any remarks. To my surprise, the picons are picked up from my SSD-directory now. I only had to install my favourite skin and everything seems to be perfect now.

 

[twol]

I have finally made it. Thank you for the instructions. I moved my picon directory from root to hdd (SSD) and cleaned my backup selection. No suspicous extensions left. Then I flashed to 6.0.001 smoothly without any remarks. To my surprise, the picons are picked up from my SSD-directory now. I only had to install my favourite skin and everything seems to be perfect now.

Great and thank you for the update

 

[malcolmp]

Changed my mind, version 6.0.001 still causing problems.

 

[ccs]

..... such as ?

 

[malcolmp]

Updated Jedimaker channels to echannelizer, edited channels sent to box, box won't boot up, reflashed and reverted to 5.16.

 

[twol]

Updated Jedimaker channels to echannelizer, edited channels sent to box, box won't boot up, reflashed and reverted to 5.16.

Next time:

log into the box with putty ...
type init 4 (space between)
type enigma2
look at log on screen and see if there is an errror/failure

 

[malcolmp]

OK, thanks. I'll retry 6.0.001 and keep this in mind.

 

[malcolmp]

The only error was "no room left on device" this doesn't seem to happen with 5.14