OpenVix 6.9.001 and Hotbird problem

[KaaS]

A strange problem that has been going on for a while and is still going on. Can anyone help?

When I went to the satellite side (Hotbird) and when I go back to the antenna side (T2) and try to record one channel and when I try to go to another channel or channel bundle, there is no picture. One of the tuners (J) no longer works.

This problem only occurs when I go specifically to Hotbird 13. If the device goes on its own, for example to record something on Hotbird, there is no this problem.

When I restart Enigma2, all works as should again.

 

[twol]

and this works Gigablue Uhd Quad 4K Pro with Sundtek USB DVB-C/T2 tuner? I understood only Giga T2 plugin tuner worked.

 

[KaaS]

Sundtek USB DVB-C/T2 tuner is not installed until this Sundtek man has time to try again fix it. These are just the device's own tuners (I and J).

 

[KaaS]

This is only now a special problem. Now I noticed that when the device automatically switched itself to Hotbird and started recording the test, a moment later during the recording I opened my device and some of the Terrestrial channels no longer worked.

 

[Huevos]

So I & J are internal DVB-T2 tuners?

 

[KaaS]

So I & J are internal DVB-T2 tuners?

YES

 

[KaaS]

I have done some more testing and found a repeatable pattern.

When I switch from any Hotbird 13E service back to DVB-T2, tuner J consistently loses picture if tuner I is already recording a DVB-T2 service.

Signal is still present on tuner J (signal level is shown), but there is no video.

Restarting the Enigma2 GUI immediately restores tuner J. A full reboot is not required.

The same sequence from Astra 19.2E back to DVB-T2 does not cause the problem.

This appears to be fully reproducible on my receiver. Since a GUI restart fixes the problem immediately, I wonder if some software state or tuner resource is not being released correctly after leaving Hotbird services. The issue has occurred every time during my tests. I have not been able to reproduce it when returning from Astra 19.2E.

The issue is not related to a specific Hotbird channel or transponder. I have tested several different Hotbird services and they all produce the same result. The same test using Astra 19.2E instead of Hotbird 13E does not trigger the issue.

 

[bellejt]

maybe not directly related but sometimes I also have 1 tuner not freed on sat reception .If I go to tunersettings and signal test and switch tuner it gets freed. Maybe simular problem.

 

[KaaS]

EDIT:

 

[Huevos]

...

 

[KaaS]

Oh i am sorry, my intention was for it to help rule things out but my message did the opposite. Sorry. I'm deleting the message because it's offensive.

 

[KaaS]

Quite often, after I have first been watching Hotbird 13 channels and then switch back to a channel on the Digita terrestrial network (for example, MTV3 Ava), I only get a black screen, and after a brief moment, the device crashes. The log shows the following entry:
<297972.122691> 17:30:03.4203 PC: b5c5a9a0
<297972.123099> 17:30:03.4207 Fault Address: b5628000
<297972.123322> 17:30:03.4209 Error Code: 2571
What does this mean?

 

[abu baniaz]

It will be better to upload the whole crash log. Check for any sensitive details like WiFi password, IPTV usernames before uploading it.

 

[KaaS]

Hopely this helps