Superb quality and spec AB-Com PULSe 4K SE. Crazy offer! Only £129! FREE UK DELIVERY! 4K UHD, Enigma 2, Multiboot 4 images & more!...
Superb quality and spec AB-Com PULSe 4K Rev II Twin Satellite tuner only £179! FREE UK DELIVERY! 4K UHD, Enigma 2, SATA HDD facility, Multiboot 4 images & more!...

OpenViX 6.9 Release discussion thread

Enable hdmi-cec, and enable forward volume keys
These are already enabled this only seems to be on the vu+duo4kse I have an old zgemma h7s 4k and there is no problem so it seems as if its a image software problem.
Looks like I will have to stay with open atv!
 
These are already enabled this only seems to be on the vu+duo4kse I have an old zgemma h7s 4k and there is no problem so it seems as if its a image software problem.
Looks like I will have to stay with open atv!
Can you turn on debug logs and post log …preferably from restart , so I can see the initial few pages of the log
 
Can you turn on debug logs and post log …preferably from restart , so I can see the initial few pages of the log
Samsung TV. Vu Ultimo 4k. TV in standby. Vu in standby. Press "on" on Vu remote. Expected behaviour: TV leaves standby. Actual behaviour: TV remains in standby.
 

Attachments

After upgrading to 6.9.007 all the sound/audio issues i had on 006 have all gone away.

Pleased to be able to leave an upbeat post.........👍
 
Can you turn on debug logs and post log …preferably from restart , so I can see the initial few pages of the log
Do you mean from a reboot or after a first install ? Also I have never looked at logs how are they accessed and saved?
 
Do you mean from a reboot or after a first install ? Also I have never looked at logs how are they accessed and saved?
Sorry after a lot of serching I found my problem on my box there are 2 send volume settings the second was not ticked all OK now.
Being new to this vu+duo4kse ware can I find info on how to setup via unicable
 
simple question : master box on 6.9.007 and slave boxes on 6.9.003 and fallback tuner works fine switching all sorts of channels immediatly image .Updated slave boxes to 6.9.007 and channels opening after more then 6 seconds as well normal as ip channels. Anyone tested and is there a seeting maybe or idea what is changed ? Did a full flash on slave boxes without restore
 
simple question : master box on 6.9.007 and slave boxes on 6.9.003 and fallback tuner works fine switching all sorts of channels immediatly image .Updated slave boxes to 6.9.007 and channels opening after more then 6 seconds as well normal as ip channels. Anyone tested and is there a seeting maybe or idea what is changed ? Did a full flash on slave boxes without restore
I
Fallback tuner ? Are you using a plugin or is tuner setup set to client mode?
I run 2 boxes in client mode ( hd61,gbquad4k) into a gbpro and notice no real delays in service switch (freesat, encrypted, iptv).
All boxes on latest.
 
no plugin.Set tuner to not used and fallback activated. Changed to client mode and working fine now.THX a lot
 
Noticed this thing:

1. Change volume of the box
2. Immediately press MUTE
3. When Volume bar disappears the the mute goes away and audio is back

Is this a bug or a normal function ?
 
Noticed this thing:

1. Change volume of the box
2. Immediately press MUTE
3. When Volume bar disappears the the mute goes away and audio is back

Is this a bug or a normal function ?
 
Please take a look to see why, when I create on the USB drive with Swap Manager (I’ve tried this on two USB drives both brand new, formatted as ext4, and mounted) create Swap, using WinSCP I can see that the swap is being created, but on the TV it doesn’t show that the swap has been created instead, it says “No SWAP found.” Is there a way to fix this, or am I doing something wrong?
 

Attachments

  • 2026-11-21 (1).webp
    2026-11-21 (1).webp
    111 KB · Views: 12
  • 002.webp
    002.webp
    29.8 KB · Views: 9
It's a bug.
My system is now the same, but it's had a swapfile for years.

I'll take a look later....

EDIT: It does seem that the swap is added and activated. Just that the SwapManager can't find it.
 
Last edited:
Please take a look to see why, when I create on the USB drive with Swap Manager (I’ve tried this on two USB drives both brand new, formatted as ext4, and mounted) create Swap, using WinSCP I can see that the swap is being created, but on the TV it doesn’t show that the swap has been created instead, it says “No SWAP found.” Is there a way to fix this, or am I doing something wrong?
Can you telnet into box and enter:
parted -l /dev/sd? | grep swap
and also
cat / proc/swaps
and post output
 
@Huevos ,Thank you so much for your reply. I reformatted the USB drive, and I don't really feel like experimenting anymore. Especially since any one can do it if you have a USB drive connected to your receiver...Thank you very much once again
 
Last edited:
@Huevos ,Thank you so much for your reply. I reformatted the USB drive, and I don't really feel like experimenting anymore. Especially since any one can do it if you have a USB drive connected to your receiver...Thank you very much once again
Thats really not helpful…… can you at least specify how you created the swap - as there are several ways of doing this.?
 

OpenViX Feeds Status

Back
Top