[ABM-DVB-C] add one provider to channel list using ABM

[abu baniaz]

yes and my area is manchester 2 ex c&w

Your area means nothing. It is your NetID that is important. Have you checked the engineering menu for NetID in offcial receiver?

 

[aldo2332]

all i want to do is add the virgin channels ive scanned and have on my box to the existing channel list/bouquet since adding a cable tuner with out having to do this manually.

 

[aldo2332]

Your area means nothing. It is your NetID that is important. Have you checked the engineering menu for NetID in offcial receiver?

where will Ifind that? Im 100% sure mine is 41066 i live in stockport

 

[aldo2332]

this is my connections

Take a picture of the back of your receiver showing signal wires connected and attach it.

Upload screenshots of every tuner config in your receiver.

 

[abu baniaz]

You are insisting that you are using the correct NetID.

If ABM fails (when NetID is correct), it is a signal issue. Usually wires connected incorrectly/to wrong tuner, or splitter.

ABM will use the last free tuner. You have two cable tuners, you have not showed tuner configuration for both cable tuners. nor the back of receiver.

EDIT:
They you go. No wire in one of the cable tuners. Either connect a signal wire to it or disable the tuner.

 

[aldo2332]

You are insisting that you are using the correct NetID.

If ABM fails (when NetID is correct), it is a signal issue. Usually wires connected incorrectly/to wrong tuner, or splitter.

ABM will use the last free tuner. You have two cable tuners, you have not showed tuner configuration for both cable tuners. nor the back of receiver.

EDIT:
They you go. No wire in one of the cable tuners. Either connect a signal wire to it or disable the tuner.

i unplugged the ethernet as its a short wire and could'nt pull box out all the way that is always connected.
Yes i only have one Cable tuner plugged in and tuner B is enabled aswell. So ive set B as not connected and thumbs up mate ive just tried a scan it worked. Dumb me!!!! I only enabled it because i intend on using it once i was set up properly I didnt realise it would cause a problem.
Thanks for your help and to everyone else. :thumbsup: