Superb quality and spec AB-Com PULSe 4K SE. Crazy offer! Only £99! FREE UK DELIVERY! 4K UHD, Enigma 2, Multiboot 4 images & more!...
Superb quality and spec AB-Com PULSe 4K Rev II Twin Satellite tuner only £149! FREE UK DELIVERY! 4K UHD, Enigma 2, SATA HDD facility, Multiboot 4 images & more!...

AutoBouquetMaker released by ViX!

Status
Not open for further replies.
Mine runs at 4 am so not looked at it for a while. Ill be very busy till late afternoon then ill check with several boxes.

Sent from my GT-I9300 using Tapatalk
 
not had the chance yet, will in a bit though.
 
ok just ran a sky uk scan with ABM on the solo2 and it took 1 minute 21 in total from start to finish, TM nano took 1 minute 35, both on build 778. so things look ok to me.
 
ok just ran a sky uk scan with ABM on the solo2 and it took 1 minute 21 in total from start to finish, TM nano took 1 minute 35, both on build 778. so things look ok to me.

Just ran scan on my duo, scan for sky uk and sky Irl, took total time 4 minute 30.
The bouquet generation section took approx 2 mins alone?
 
Just ran scan on my duo, scan for sky uk and sky Irl, took total time 4 minute 30.
The bouquet generation section took approx 2 mins alone?

Gona fresh flash a Duo now to 778 and i'll post back with the results.
 
ok Duo on build 781, Ran ABM for sky uk, freesat, and sky Ireland too a total of 2 minutes 24 16 seconds of that was the bouquets generation.
 
ok Duo on build 781, Ran ABM for sky uk, freesat, and sky Ireland too a total of 2 minutes 24 16 seconds of that was the bouquets generation.

Mine takes more than that just to create bouquet, maybe i should delete ABM plugin and reinstall?
 
mine was a fresh flash with both a settings restore and another without and both instances ABM scans are fine for me on all receivers.
 
mine was a fresh flash with both a settings restore and another without and both instances ABM scans are fine for me on all receivers.
Mine was a fresh flash from build 762. Ideas?
Can i uninstall ABM and if so is it on feeds to reinstall?
The only thing i have also running is i keep a favorite list of some programs and have keep bouquets ticked, would this cause an issue
 
ABM is built into the image so not sure if it can be removed, Try a fresh flash to build 778.
 
you could try removing ABM and then use either of these commands to reinstall it from the feeds or download the .ipk to install manually if you wish.


opkg install enigma2-plugin-systemplugins-autobouquetsmaker

or


opkg download enigma2-plugin-systemplugins-autobouquetsmaker


The downloaded .ipk is saved to home/root.
 
you could try removing ABM and then use either of these commands to reinstall it from the feeds or download the .ipk to install manually if you wish.


opkg install enigma2-plugin-systemplugins-autobouquetsmaker

or


opkg download enigma2-plugin-systemplugins-autobouquetsmaker


The downloaded .ipk is saved to home/root.

Reinstallled ABM from feeds was different level.. Did scan still just as bad just the generate bouquet section took 3mins 12 seconds
Im confused?
 
Also found from rescan ABM not picking up Sky Sports 1 HD correct freq.
Manual scan on on 11720 freq works fine
 
Not really sure what is going on then because i installed a fresh flash of 778 and 781 onto my own duo and timed ABM as per my earlier posts, the create bouquet part lasted maybe 11 seconds in total and the whole thing was done in under 2 and a half minutes. This was for sky uk, sky Ireland and freesat.
 
maybe its speed of HDD ? who knows.... HDD was fitted by sponsor when bought.
Have just done fresh reflash to 778 using usb, restored my settings and plugins using restore and still ABM takes 0ver 3 mins to create bouquets....:mad:

Looks like im stuck with it....
 
Last edited by a moderator:
maybe its speed of HDD ? who knows.... HDD was fitted by sponsor when bought.
Have just done fresh reflash to 778 using usb, restored my settings and plugins using restore and still ABM takes 0ver 3 mins to create bouquets....:mad:

Looks like im stuck with it....
mine takes a very long time also using latest build
 
Status
Not open for further replies.

OpenViX Feeds Status

Back
Top