AutoBouquetMaker released by ViX!

[abu baniaz]

I don't have this settings mine is like this

It is a proposal and will be how it will look if there is acceptance.

 

[Mandanddeb]

The welsh regions are HTV Wales HD/SD ,HTV West HD/SD, HTV West-Thames Valley HD/SD

 

[abu baniaz]

Anybody willing to test these should backup their xml files first. Please check the swapchannels and chanenlsontop file section of xml files forsy for changes. I have modified the names too, feel free to sugegst better ones.

There is no Vix for SD receivers, this prompted post 535. If we don't need them, then they can be omitted. This will result in smaller list of regions to toggle through. Does it matter as it is a once in while activity?

I have left the Wales regions in the England xml. Only one pair of regions mentioned post 538 had S4/C. Didn't want to get rid of them if still needed.

I have not tested every region, so would be gerateful for feedback. Also I use the third party plugin and not ABM. I am unsure as to whether the Entertainment section is meant to include the swapped HD channels. They are in the all channels and HD sections.

 

[sigpark]

Anybody willing to test these should backup their xml files first. Please check the swapchannels and chanenlsontop file section of xml files forsy for changes. I have modified the names too, feel free to sugegst better ones.

There is no Vix for SD receivers, this prompted post 535. If we don't need them, then they can be omitted. This will result in smaller list of regions to toggle through. Does it matter as it is a once in while activity?

I have left the Wales regions in the England xml. Only one pair of regions mentioned post 538 had S4/C. Didn't want to get rid of them if still needed.

I have not tested every region, so would be gerateful for feedback. Also I use the third party plugin and not ABM. I am unsure as to whether the Entertainment section is meant to include the swapped HD channels. They are in the all channels and HD sections.

@abu baniaz - I will test tonight. Thank you for all of your great help.

@andyblac please see my post http://www.world-of-satellite.com/s...leased-by-ViX!&p=251822&viewfull=1#post251822 It contains a skyie.xml attached that is correct for Sky Northern Ireland. I used the file that you committed in your post http://www.world-of-satellite.com/s...leased-by-ViX!&p=250419&viewfull=1#post250419 which I amended for BBC 1 HD NI swap, as well as the HD Bouquet order so that the line up was BBC1 NI HD / BBC NI 2 HD / UTV HD / Channel 4 HD / Channel 5 HD

 

[sigpark]

Anybody willing to test these should backup their xml files first. Please check the swapchannels and chanenlsontop file section of xml files forsy for changes. I have modified the names too, feel free to sugegst better ones.

There is no Vix for SD receivers, this prompted post 535. If we don't need them, then they can be omitted. This will result in smaller list of regions to toggle through. Does it matter as it is a once in while activity?

I have left the Wales regions in the England xml. Only one pair of regions mentioned post 538 had S4/C. Didn't want to get rid of them if still needed.

I have not tested every region, so would be gerateful for feedback. Also I use the third party plugin and not ABM. I am unsure as to whether the Entertainment section is meant to include the swapped HD channels. They are in the all channels and HD sections.

@abu baniaz - I have tested the six xml files. I have used various "swap" yes/no, and checked the HD order, as well as "all channels" order. As example I have noted that regions of Scotland receive BBC Scotland and Wales get BBC Wales and ITV Wales accordingly. Ireland and N. Ireland look good from all respects. On the UK regions, I confirm the .xml works fine, but I am not overly familiar with all of the region variations so cannot be 100% on channels by UK region; that said it all looks good. Great work

On the FreeSat options, I am not sure what G2 is against many of the listings? Have tested London/South HD - looks good.



Last thing, during testing I happened to notice that some "help" text was masked in ABM (marked in red) - I never noticed before or knew the feature was there. I checked with older.xml files and condition was same - so nothing to do with files you posted.

 

[DaMacFunkin]

Hello, sorrry if this is the wrong thread, but $ly sports HD 1 has changed its frequency and autobouquets picks up the old channel (maybe because it is transmitting a blank screen) does someone need to manually change this or will it eventually sort itself out?
Thanks.

 

[duoduo]

Working fine for me.

 

[Mandanddeb]

Hello, sorrry if this is the wrong thread, but $ly sports HD 1 has changed its frequency and autobouquets picks up the old channel (maybe because it is transmitting a blank screen) does someone need to manually change this or will it eventually sort itself out?
Thanks.

It not a freq change it's your card thingymejig of which talk isn't welcome or supported here hope that's ok mods!

Also @ Abu baniaz thank you for your hard work but I don't know how to alter files etc but I'm willing to learn!

 

[seame]

I've downloaded the file in post 539 and applied to ABM (thanks to all involved). I now have all the NI HD swapped with the SD channels in the main bouquet only, I've been looking at the .xml file and was wondering if there is a way to modify it so the Hd swap applies to the entertainment bouquet?

I'm not holding out much hope as if it was possible to do so it would already have been done.

 

[nexstar]

Thanks to all who created and maintain ABM. I have been using it for a while now but I only run it manually which obviously restricts one of its main benefits. The problem is that I have a 'Favourites TV' bouquet which the family have now become familiar with and they use the number keys on the remote to quickly select the first 9 of those favourites. As ABM sorts other bouquets to the end then I have to manually shift the favourites to the top of the list after each new scan. That's not a problem but is the reason why I don't run ABM daily.

Is there some other utility which I could run after ABM to re-order the bouquets? Or is there some other workaround such that I can get my favourites bouquet to stay at the top? Or should I somehow re-educate the family?

 

[judge]

You can easily set your favourites to be the main (first) bouquet.
Just enable expert mode & work through the options.

 

[nexstar]

Many thanks for that. I had it set in expert mode but hadn't realised that you could specify the main bouquet. I had managed to complicate things even further as I discovered that I was creating bouquets with both Freesat and Sky providers and my Favourites (TV) bouquet was ending up way down the list of bouquets. It's all good now though and a daily scan has now been scheduled .

Thanks again.

 

[ovladaf]

A few of the really nice features of this plugin as follows.

This plugin currently supports 15 different providers as detailed below

AustriaSat 19.2 East
Canal Digitaal HD 19.2 East
Canal Digitaal SD 19.2 East
Czech Republic 23.5 East
Freesat 28.2 & 28.5 East
Mobistar FR 19.2 East
Mobistar NL 19.2 East
SKY Italy 13.0 East
Sky UK 28.2 & 28.5 East
Slovak Republic 23.5 East
TéléSAT HD 19.2 East
TéléSAT SD 19.2 East
TVSat 13.0 East
TV Vlaanderen HD 19.2 East
TV Vlaanderen SD 19.2 East

This plugin has been coded from the ground up in C+ and python which means it's very fast and does not need any form of service scan prior to using, it can be run from a totally virgin setup in around 60 to 80 seconds flat.

This plugin as the name suggests is a Bouquet Maker that where possible will exactly mirror the provider it has been setup for, for example if setup for sky uk and freesat it will exactly mirror the Sky uk / freesat channel number line up.

The plugin can detect if you have a free tuner ( as in if your using a multi tuner receiver ) and use that tuner, allowing you to continue to watch Live TV with very little interruption other than a spinner and a very brief progress bar. This allows you to manually run the plugin during say a advert break with as little interruption possible. If however you dont have a free tuner as in the case of say a Vu solo dont fret as the plugin will temporarily take over the tuner while retaining it's speed allowing you to run it during a advert break if needed.

This plugin can detect your tuner configuration and will only present you with the providers that correspond to that configuration setup. for example in the above screen shots you can see my setup for sky uk and freesat, without listing all the other providers the plugin supports but can not tune into due to my own setup.

Hi.

Great job!!!

Is it possible to add more providers???

I have modified one provider's file:

<provider>
	<name>Digital+ Astra</name>
	<protocol>fastscan</protocol>
	<!-- namespace could change even on the same sat...
	     in case of use the service hacks to fix it -->
	<namespace>c00000</namespace>
	<transponder frequency="11038000" symbol_rate="22000000" polarization="1"
		fec_inner="4" orbital_position="192" inversion="2" system="0"
		modulation="1" roll_off="0" pilot="2"
		nit_pid="0x10" nit_current_table_id="0x40" nit_other_table_id="0x41"
		fastscan_pid="0x10" fastscan_table_id="0x40" />
	<sections>
		<section number="1">Digital+</section>
	</sections>
	<servicehacks>
<![CDATA[
if service["number"] > 999 or service["number"] < 1:
	skip = True
]]>
	</servicehacks>
</provider>

but when i launch the scan i get the message "cannot read data"...

is it correct?? or for this provider is it possible??

thanks and regards.

 

[abu baniaz]

There were some changes a while back, as we have have no updates on teh 3.0 images, can somone upload the latest version with the updated xmls? People can the remove existing one and install the latest one. They are available on the other OE alliance images. I'd be grateful if someone can teach how do download it too? I can view the xmls on the GIT, but don't know how to download them.

I can download version 91 from receiver.

Thanks.

 

[Larry-G]

There were some changes a while back, as we have have no updates on teh 3.0 images, can somone upload the latest version with the updated xmls? People can the remove existing one and install the latest one. They are available on the other OE alliance images. I'd be grateful if someone can teach how do download it too? I can view the xmls on the GIT, but don't know how to download them.

I can download version 91 from receiver.

Thanks.

Here's the latest version of the OE-A plugins folder from the GIT, containing among other things ABM.

Create a free GIThub account and you should then see the option to download files as in the screen shot.

 

[putitonthewall]

I hope I'm in the right forum for this post.

Autobouquetsmaker not working now in south west Spain/Portugal . They are no longer getting the BBC radio channel that ABM needs. Is there a work around?

thanks

 

[abu baniaz]

How many 28.2 channels do you receive if you perform a conventional scan?

 

[putitonthewall]

How many 28.2 channels do you receive if you perform a conventional scan?

Its my dad in Spain that has a box. I'll have to talk him thru a blind scan and get back to you.

thanks

 

[Rob van der Does]

Then it would be easier to simply install a settings list from the feeds I guess.

 

[abu baniaz]

ABM does not require a radio channel.

Not sure what ABM locks onto if there is no existing active channel 28.2 channel, but I know that Lraizer's one zaps to the Sky intro channel. So long as you are on an active 28.2 channel ABM should work.

I fear that your father is affected by the satellite change. Best for him to speak to others/installers in his area and see if they are receiveing any 28.2 signal and compare dishes. May not be possible.