Superb quality and spec AB-Com PULSe 4K SE. Crazy offer! Only £129! FREE UK DELIVERY! 4K UHD, Enigma 2, Multiboot 4 images & more!...
Superb quality and spec AB-Com PULSe 4K Rev II Twin Satellite tuner only £179! FREE UK DELIVERY! 4K UHD, Enigma 2, SATA HDD facility, Multiboot 4 images & more!...

[GiGaBlue UHD UE 4K] Backups fail at 77%

Out of interest what is the difference between an imagebackup file which is a mmc.zip and a usb.zip, and also a tar.gz backup file
 
I have ran init 4, then edited the settings file to remove /media/hdd etc, saved it, then ran init 3. When I did the install of an updated picons file, the backup of files went quickly without any problems.
I will do a backup of the system just to make sure it's ok now.

It maybe coincidental, but I can't help thinking all these problems started when I upgraded to viximage 6.9.003, because prior to doing that I have never had any problems with the box or OS at all.

Thanks
I think you may be ok now as you have removed the spurious /media/hdd entries from the settings file, but this would have absolutely nothing to do with the 6.9.003 image itself. You must have changed a setting in backup manager or when you were changing around SSD mounts. The default folders and files to be backed up in a settings backup are just the important system files for consistent running of the box from update to update (or if you do a full flash and restore). The default settings would not include a whole hdd backup for sure. The hdd (or SSD in your or my case) just holds the files you have recorded, the EPG data (usually), your settings and image backups and whatever files are needed for certain plugins. The entire enigma system is stored in the flash memory of your receiver and runs from there.
 
Please don't mixup a settings backup and an image backup.

I don't think there is a need to create an image backup unless you are modifying files on the system or want to be safe from plugin server shutdowns. Nonetheless, it should work as originally designed.

If you have set up your system to create an image backup before flashing, I would strongly recommend you disable this and only create an image backup manually.

The settings backup is sufficient for almost all users.
 
Ok, I will disable image backups now, but I wasn't aware I had enabled them.

Thanks
 
Last edited:
Backups are now running without any errors now.
I want to thank both joe90 and twol for both their help and patience with my problem, particularly joe90 for finding the reason or fault which has been causing the persistent errors.

Thanks again
 
I just rebooted from slot 2 ojn my box to slot 1 which has viximage 6.9.003, with the intention of upgrading to 6.9.007.
As the files were being backed up, it stopped again on 77%.
So I ssh into the box , run the cmd df, but can't remember how to list or get to the /etc/settings so I can check the config.backup line which I edited last week..
If someone could please tell me.
Thanks
 
Ok, I found the /etc settings folder and the edited line I did before is still the same .
I am assuming that regardless of whether I boot from or into slot 1 or slot 2 the settings will still be the same, and if so why do the backup of the files before I want to flash a new image, stop at 77%

This the line after I edited out the hard disk etc.
config.backupmanager.backupdirs=['/etc/enigma2/', '/etc/fstab', '/etc/hostname', '/etc/network/interfaces', '/etc/passwd', '/etc/shadow', '/etc/etc/shadow', '/etc/resolv.conf', '/etc/ushare.conf', '/etc/inadyn.conf', '/etc/tuxbox/config/', '/etc/wpa_supplicant.conf', '/usr/softcams/', '/etc/auto.network', '/etc/samba/smb-user.conf', '/etc/samba/private', '/usr/keys', '/usr/script', '/etc/udev/known_devices']
 
Last edited:

OpenViX Feeds Status

Back
Top