[ViX_Misc] Edision mio 4K

[mrbeach]

Is there any setting that allows me to select one of the found channels after the channel search?
This Works on my VU + receivers. (Solo2 +Solo 4K)
But on my Edision mio 4K
It always goes to another channel after the search.
annoying because I have a motorized dish.
So, for example, if I search for channels on 30W, it can go to a channel on 0.8W !
annoying

 

[cactikid]

If you are going down the A to Z listing and seeing say bbc1hd press ok it should go to that station.
You mention you have a motorised sat with many sats,same rule should still apply but before pressing the ok button at the bottom of screen should state from what sat that channel is from.Then if correct it should go to that channel and move sat if needed.

 

[mrbeach]

Dont work i did a scan at 0,8E and when i press a channel that was found after scanning the dish moved to 33.0E and Wine TV channel!
If i do the same vith my VU+ boxes it open the channel i press on if you understand what i mean.

Edit:
This is only when i did a scanning if i select a channel from my favoritlist all is ok the dish mowes to the right channel.

 

[mrbeach]

Problem solved

There were Two Last scanned in favorites and first in the first Last scanned was Wine TV I deleted it and now it works