Hauppauge WinTV-NOVA-T USB Stick - VIX?

[boxer29]

1susb :not found
while the device is in the back of the usb port
root @vuduo: / hash 1susb
-sh 1susb: not found
any thing wrong here
why my telnet is not giving the chip details

 

[silverfox0786]

its not 1susb its lsusb

all small npt caps but for clartity i will show in caps below

LSUSB

 

[silverfox0786]

here is an example

Welcome to ViX for ClarkeTech
ViX v2.3
ClarkeTech login: root
root@ClarkeTech:~# lsusb
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 004: ID dead:beef
Bus 002 Device 003: ID 1d57:32da
Bus 002 Device 002: ID 1a40:0101 TERMINUS TECHNOLOGY INC.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 2040:7060 Hauppauge Nova-T Stick 2
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
root@ClarkeTech:~#

 

[stick50jr]

thanks
can you tell me how do you install it
do you first install the drivers and then the usb stick and how do you get the extra tuner
do you have to go to the tuner settings
thanks

I already told you how to test the AF9015 drivers (closest thing to AF9013). If you are not prepared to tell us that you've tried this then I can't help you.

Blue Button > Vix > Packet Manager > ..... wait while Packet List is downloaded .... then you should be able to find ItalySatDTT-Downloader-Vuduo package. Highlight this package and press <OK> and follow the prompts to download etc. After a re-boot you should have a new plugin. Run this plugin to select the DTT driver to download. Once downloaded you can try to enable (within plugin) and then re-boot again. If the driver you selected is compatible with your stick you'll be in business... otherwise it'll be bad luck.

In my case, Avermedia TwinStar A825, the AF9035 drivers recognised the device and both tuners (C & D) showed up and work well. The SNR doesn't get displayed properly, but actual operation is fine.

Good Luck.

Just leave the usb tuner plugged in. BTW all this I learned by trial and error... perhaps you can too.

Also you can try the AF9015 drivers that are supplied with Vix:

there not disapeared just renamed and replaced

look in drivers section of plugins

and you will see

dvb-usb-af9015

and

dvb-usb-siano

both avermedia just dependant on what chipset you have

 

[stick50jr]

Further to the above, I searched through the various directories within Vix 2.3 image and found the following file:

\lib\firmware\dvb-fe-af9013.fw

As I said before, you should really have a look for yourself and try it out.

To use this, I imagine you would use the driver for AF9015 (as already suggested by SilverFox) and it will probably load the appropriate firmware for your AF9013 chipset.

 

[boxer29]

Thanks will give it a go and inform you