[Venton Unibox HDx] Installation of USB DVB-T Terratec Cinergy DT USB XS Diversity stick?

[d2mac]

I've installed the dib0700 driver via Plug-in extension and booted the box.

Is there something else needed for the installation?
The stick's light indicator is On after the driver's installation.
The USB receiver will not appear to the Turner Setting list (but just internal 2xT2+ Sat turners).

 

[Eragon]

Maybe this could give some help:
http://www.linuxtv.org/wiki/index.php/TerraTec_Cinergy_DT_USB_XS_Diversity

 

[d2mac]

The /etc/modprobe.d directory is empty
Kernel&driver reinstallation via Telnet showed that they are up to date

If I understood correctly rest of that page for tune-up remote etc.

Though:#dmesg | grep -i dvb
doesn't indicate that the stick is found?

bx000_common mt2060 dvb(OF)
[<e1b741e4>] stk7700d_frontend_attach+0x60/0x190 [dvb_usb_dib0700]
[<80469ea8>] dvb_usb_adapter_frontend_init+0xe4/0x1b4
[<80468f24>] dvb_usb_device_init+0x328/0x654
[<e1b715c4>] dib0700_probe+0x88/0x184 [dvb_usb_dib0700]
Modules linked in: dvb_usb_dib0700(+) xc4000 lgdt3305 s5h1411 xc5000 mxl5007t t
ner_xc2028 mt2266 dib9000 dib8000 dib0070 dib7000m dib7000p dib0090 dib3000mc d
bx000_common mt2060 dvb(OF)
[<e1b741e4>] stk7700d_frontend_attach+0x60/0x190 [dvb_usb_dib0700]
[<80469ea8>] dvb_usb_adapter_frontend_init+0xe4/0x1b4
[<80468f24>] dvb_usb_device_init+0x328/0x654
[<e1b715c4>] dib0700_probe+0x88/0x184 [dvb_usb_dib0700]
epc : e1b717f8 dib0700_i2c_xfer+0x48/0x4f0 [dvb_usb_dib0700]
ra : e1b717f8 dib0700_i2c_xfer+0x48/0x4f0 [dvb_usb_dib0700]
Modules linked in: dvb_usb_dib0700(+) xc4000 lgdt3305 s5h1411 xc5000 mxl5007t t
ner_xc2028 mt2266 dib9000 dib8000 dib0070 dib7000m dib7000p dib0090 dib3000mc d
bx000_common mt2060 dvb(OF)
[<e1b717f8>] dib0700_i2c_xfer+0x48/0x4f0 [dvb_usb_dib0700]
[<e1b741e4>] stk7700d_frontend_attach+0x60/0x190 [dvb_usb_dib0700]
[<80469ea8>] dvb_usb_adapter_frontend_init+0xe4/0x1b4
[<80468f24>] dvb_usb_device_init+0x328/0x654
[<e1b715c4>] dib0700_probe+0x88/0x184 [dvb_usb_dib0700]
root@ventonhdx:~# df -m > /tmp/meminfo.dcc; echo ">>> DONE <<<";
>>> DONE <<<