OV 5.4.003 plus GigaBlue and LNB Switch Off???

[CRMS]

Has OV 5.4.003 solved the issue with GigaBlue boxes which have been switching off power to the LNB when tuner A stops an activity prematurely when other recordings are scheduled??
So removing the need for a power injector to keep the LNB live??

I have spotted any comments on the forum or in the OpenVix 5.4 thread.

 

[ccs]

Looks like it was sorted some time ago in the update for drivers now dated 23/7/2020...

The issue is solved for me on a GB UE 4K.

https://github.com/oe-alliance/oe-alliance-core/commit/a282a00645005370090cdaee29580024d7d20d9c

 

[abu baniaz]

Ever since the systmeinfo.py changes, I still get tune failed issues. Right pain in the rear when using ABM from cold start or a service not on the LNB. I don't have an issue with PLi.

 

[twol]

have to say works fine for me, but I don‘t use ABM. There is no significant difference between OpenPli and OpenViX in the dvb libraries and NimManager

 

[abu baniaz]

I don't use a powered switch or LNB. Just an LNB powered by the receiver.

 

[twol]

I don't use a powered switch or LNB. Just an LNB powered by the receiver.

.... and I have a mixture of powered switches and unicable lnb inputs- but on one receiver the main input is an LNB powered by the receiver.

 

[abu baniaz]

I must be doing something wrong.

EDIT:
The attached video shows me switching from a Terrestrial channel to its satellite equivalent. You will see, there is a tune failed message. LNB power is meant to be constantly on. If that was the case, LNB would not need to power up.