[ET9x00] ViX Team ET9x00 Image v2.3 -07/12/2011

[pooface]

New VIX Image ET9x00 - v2.3
07/12/2011 - Open ViX 2.3

From VIX Team
​

Enigma: 07-12-2011.
Enigma Plugins: 07-12-2011.
GCC Version: 4.4.4.
Kernel Version: 3.1.0.
Drivers: 2011-11-05.

This image requires the latest bootloader (attached to this post) to be flashed. This is because Xtrend have changed the way the drivers work. So, before updating your image, you will need to first flash the bootloader, then flash the new image. Flashing of new bootloader only takes a few seconds, so once flashing's completed, then just turn off the box, transfer the new image to the usb stick, and flash with that. Also, it is recommended to NOT use older images with this new boot loader, as this may result in a bricked box.

DO NOT UNPLUG POWER SUPPLY DURING BOOTLOADER OR IMAGE FLASHING! DOING SO COULD RENDER YOUR RECEIVER USELESS!

Also, please remember, due to massive changes in the image, DO NOT restore any settings from previous images. Timers, channel lists etc are fine, but a settings restore with restore wizard will only cause issues!

Because of a lot of changes behind the scenes of the image and building, you will not be able to perform an online update. A full flash is required for this version of ViX image.

This revision of the image has undergone many different builds, hours and hours of coding/fixing, and we hope that you are now happy to reflash with the latest ViX image!

Team ViX Enchancements

New Features

Updated to kernel 3.1.0 - This new kernel is much faster and better than the previous kernel, and finally you all get to test it if you held off updating to other images. If you did update, you can finally come back to the ViX image
VFD Icons fully working - Unique to the ViX image. The VFD icons on the front of the box are working correctly how the manufacturer intended them. Seperate icons for Timeshift (rather than using the recording icon), Sat icons, LAN icon, USB icon and HDD icons, all working perfectly. View the pictures below to see what they look like.
Added items to the Information Screen - Added Devices and System Information to Menu -> Information. In Devices, you get all the information about connected devices on your box (HDD, USB and Network Shares), and System Information will show you your memory on your box (Swap, Free memory etc). See screenshots below for more information.
Added OSD Settings - This replaces the overscan option within the ViX image. Go to Menu -> Setup -> System -> OSD -> OSD Setup, and ensure the screen fills your TV set exactly to ensure that all menu options are shown correctly for your TV.
Updated Blindscan - Now, ET9000 and Vu+ Uno both have blindscan ability incorporated in to the image. And, best of all, a nice simple scan routine for it. You can choose to scan all horizontal and vertical polaritys, as well as high and low bands all in one pass. Save having to run the blind scan for each individually :thumsbup:.
Added support for HDMI-CEC - This image now allows you to control your box using your tv remote. Remember, this is still experimental at the moment, and can work differently between different brands of TV makes/models.
Added uShare - Allow the box to be detected by your DLNA devices that support this protocol. This can be configured under Menu -> Setup -> System -> Network -> uShare Setup.
Added MiniDLNA - Same as uShare, but some people were having problems with uShare, so we have added a different version for people to use.
Added AFP - The Apple Fileshare Protocol makes it easy for your OSX devices to find your box and use the box natively within the OS. This can be configured from Menu -> Setup -> System -> Network -> AFP Setup.
Added EPG Automatic Refresh - This is useful for members who keep a single EPG datasource on a network share with multiple boxes. In Menu -> Setup -> System -> EPG -> Settings, you have the option to choose a network location (as long as configured within the Mount Manager). If you use this, you might want to update the EPG data from this location automatically. So now you can using the Automatic Refresh option.
Added Automounts option - This allows the box to automatically recreate network mounts. If you've had times where the NFS of CIFS server has been restarted, or lost power etc, then you'll know that your box cannot access this network share. Well, as long as you have configured the share through the Mount Manager, then you can configure the Automount to automatically remount the share as often as you like by going to Menu -> Setup -> System -> Network -> Devices -> MountManager.
Default Skin Change - The Default skin has been changed from ViX HD to ViX Night HD. This is a new ViX skin that has been developed for those who want a darker skin for their image. See the screenshots below for comparisons between the two. If you prefer the old ViX skin, it can still be downloaded from the download server, and is now called ViX Day HD. Please report any skin issues you may find with the ViX Night HD skin. We think we have them all covered, but can't be too sure...
Many plugins translated/made translatable - Allows the plugins to display correctly the information in your own language (as defined on original setup).
Deleted a number of plugins - Due to the "war on licences", a number of plugins whose license has changed, has been reverted to the non-licensed version of the plugin, or had to be removed from the image indefinitely.
Added seekbar functionality to the image - Allow you to seek within a recording playback to where you would like to be within the playback. To utilise this, please hold down the << or >> buttons on your remote, and the seekbar will appear at the top. Use the arrow keys on the remote to choose where you would like to seek to in the playback, and press OK to start playback from this point.
Added Image Download to Image Manager - This allows you to download the latest full image from the server, and flash it to your box (Vu Only). To access this, go to the Image Manager from with ViX menu, and press the help button. This will list all available images to download.
Added playback support for FLV files - Now you can add FLV files to your recordings drive and play them natively within the system.
Lots more under the hood updates/enhancements - A few menu options and screens have become more integrated to their respective menus. For example, the Recording Paths menu is no longer required, as Timeshift Path is defined in Timeshift Setup, and Recording Path in Recording Setup.

Fixes

Tweaked SoftCam manager.
Corrected a number of plugins.
Updated network components, including better support for WiFi.
Updated translatability; updated German & Dutch translations.
Hidden several ViX-core functions from the plugin-browser.
Better handling of SWAP partitions by the Mount Manager.
Tweaked TimeShift Code.
Remove SD/HD split from ChannelSelection as it was buggy.
Magic skin updates
MenuSort fix.

Button Mappings

Short Red** & *** - Show current channel EPG info (ViX Single EPG).
Long Red*** - Show current event.
Short Green** & *** - Timers.
Long Green*** - AutoTimer Timers.
Short Yellow*** - EPG Search.
Long Yellow*** - IMDB Database.
Short Blue - Extensions.
Long Blue*** - Plugins Menu.
EPG - Opens ViX EPG.
Left/Right** - Opens ViX QuickEPG.
Left/Right** - Opens ViX QuickEPG.
Up/Down** - Open Full Screen Channel List.
Long Up/Down** - Open Simple TV List.
TV Button** - Open Full Screen Channel List.
Long TV Button - Open Bouquets List.

** Can be changed in ViX Menu
*** Can be turned off in ViX Menu

Known Bugs

• Nope

Special Thanks

• rytec - for his continued support.
• zoka.cc for his Picon sets
• Coolman and all other developers for their plugins used in the feeds of this image.
• All of the ViX Beta team for their hours of testing and dedication on getting this image and DTT working

Requests

If anyone is interested in doing any translation work for the plugins and the image itself, please contact either Andy of Sicilian...

Screenshots

Information Menu:

About:

Device Information:

System Information:

OSD Setup:

HDMI-CEC Setup:

EPG Menu:

EPG Settings:

Network Menu:

AFP Setup:

uShare:

MiniDLNA Setup:

AutoMount Setup:

Seekbar:

DO NOT UNPLUG POWER SUPPLY DURING BOOTLOADER OR IMAGE FLASHING! DOING SO COULD RENDER YOUR RECEIVER USELESS!
Downloads

http://www.world-of-satellite.com/showthread.php?13651-ViX-Team-ET9x00-Image-v2-3-07-12-2011

 

[punisher]

Guys another awsome image. Seriously well done to everyone involved n andy for bein a codin geniousss :thumbsup:

 

[davedap]

Thx u all for your hard work and dedication, cant wait to try thx again

 

[Larry-G]

Guys another awsome image. Seriously well done to everyone involved n andy for bein a codin geniousss :thumbsup:

yup i completely agree with that, although i think were going to have to either get you some spelling lessons or take that flaming ipad away from you.

 

[Braggster]

Awesome image guys.. well done once again on a quality image
Its now play time !!!

 

[Alias1]

Guys gotta say I am disappointed
1. The picture keeps freezing for a couple of seconds approx every 5 minutes; yes I am using a non standard cam but that should make no difference.
2. The standard skin is pushed to the left I know this can be fixed but why should I have to do it.
3. Some of the skins on the vix downloads are not compatible with this image see the crash log.

 

[Sicilian]

Guys gotta say I am disappointed
1. The picture keeps freezing for a couple of seconds approx every 5 minutes; yes I am using a non standard cam but that should make no difference.
2. The standard skin is pushed to the left I know this can be fixed but why should I have to do it.
3. Some of the skins on the vix downloads are not compatible with this image see the crash log.

Would help if you posted in the corrected thread! Moved here into correct thread.

1. We are investigating a possible softcam check issue. Might help if you explain what softcam you are using and whats non-standard about it. If needed send us a pm.
2. Thats down to the new OSD settings. Menu > Setup > System > OSD, takes seconds to adjust.
3. We never claimed that they where fully compatible, you can make compatible if you wish and we'll update them in the feeds.

 

[The Lambton Worm]

Two things for me: 1. Is it possible to move the menu box to the right of the screen? and 2. I'm having to rescan all satellites even after I've uploaded my bouquets etc. Is this normal? I can't remember what happened with the last major update.

Otherwise, everything else works perfectly. So thanks to everyone involved especially Andy who I know from personal experience will not stop working on a bug/error/project until he finds a solution.

:thumbsup:

 

[pooface]

I'm getting the same problem but its every 6 minutes. Checked the Softcam Manager Log and the following message is appearing every 6 minutes: CCCam2.2.1 is frozen. Restarting....

It restarts and everything is fine for another 6 minutes. There are no crash logs though.

We're looking in to this, but, in your cccam.cfg file, have you got the following lines set (not commented out with the # as well):

ALLOW WEBINFO: yes
WEBINFO LISTEN PORT : 1601

Use any port number you want, but needs that to be in there...

 

[The Lambton Worm]

Sorry mate. I edited it out after seeing the other thread. The solution suggested by Robin van der Does works perfectly. Thanks all the same though.

Details here.

 

[pooface]

Sorry mate. I edited it out after seeing the other thread. The solution suggested by Robin van der Does works perfectly. Thanks all the same though.

Details here.

Yeah, I also posted a different fix for it, that will still check if cccam is frozen or not...

 

[Aslain]

Does the channel switching with key numers works for you? It doesnt for me. It only shows the numbers for a few secs, pressing OK doesnt help either. Using default skin without any changes to keys.

 

[Alias1]

Would help if you posted in the corrected thread! Moved here into correct thread.
3. . We never claimed that they where fully compatible, you can make compatible if you wish and we'll update them in the feeds.

I am NOT trying to pick a fight here but that is a lame explaination.
How the hell is a newbie supposed to be able to pick that up.
This thing was beta tested for so long that surely that should have been checked.
As for the fan control plugin they are now up to version 3 not 2. something.

 

[Larry-G]

I am NOT trying to pick a fight here but that is a lame explaination.
How the hell is a newbie supposed to be able to pick that up.
This thing was beta tested for so long that surely that should have been checked.
As for the fan control plugin they are now up to version 3 not 2. something.

that bug was not present in the beta testing and only presented it self at the last minute as a update was launched just prior to the final release, if you have a problem with the image then so be it but the point we are trying to make is posts like your original post are next to worthless especially from a supposedly advanced user as your self. if you want to make a bug report by all means do we will welcome it with open arms, but making a post just to bitch and moan is petty and childish.

 

[Alias1]

that bug was not present in the beta testing and only presented it self at the last minute as a update was launched just prior to the final release, if you have a problem with the image then so be it but the point we are trying to make is posts like your original post are next to worthless especially from a supposedly advanced user as your self. if you want to make a bug report by all means do we will welcome it with open arms, but making a post just to bitch and moan is petty and childish.

You are right I am wrong end of story; you wont hear any more about this image from me on this forum happy

 

[Larry-G]

You are right I am wrong end of story; you wont hear any more about this image from me on this forum happy

we welcome all bug reports.

 

[Sicilian]

I am NOT trying to pick a fight here but that is a lame explaination.
How the hell is a newbie supposed to be able to pick that up.
This thing was beta tested for so long that surely that should have been checked.
As for the fan control plugin they are now up to version 3 not 2. something.

We you could start by posting what issues your having with other skins and which skins as for dan control you post the version 3 plugin instead of moaning. Maybe we should have released the image based on 3.0.3, let everyone upgrade, then you really would have had something to bitch and moan about

Like Pheonix said, we accept all bug reports with open arms, but we need full information, not one line moans.

 

[Rob van der Does]

Guys gotta say I am disappointed
2. The standard skin is pushed to the left I know this can be fixed but why should I have to do it.
3. Some of the skins on the vix downloads are not compatible with this image see the crash log.

3. . We never claimed that they where fully compatible, you can make compatible if you wish and we'll update them in the feeds.

I am NOT trying to pick a fight here but that is a lame explanation.
How the hell is a newbie supposed to be able to pick that up.
This thing was beta tested for so long that surely that should have been checked.
As for the fan control plugin they are now up to version 3 not 2. something.

ad 2: That is due to the fact that your TV apparently is set to overscan: you should not do that. But if you do, you can correct this via the OSD-settings

ad 3: I f you had any idea what betatesting is about, you would not have mentioned this. Or at least not in this way.
We do put a lot of effort in testing as much plugins as possible. We even repaired plugins of which other image makers simply say "you must ask the plugin maker to repair it". And we took out a number of plugins that we can't repair.
But you can't seriously expect us to test every possible plugin in every possible hard- and software combination. Or if you do, testing would take month instead of weeks: is that what you want, just for a plugin?

Does the channel switching with key numbers works for you? It doesn't for me. It only shows the numbers for a few secs, pressing OK doesn't help either. Using default skin without any changes to keys.

Yes, works flawless on all boxes.

 

[Alias1]

ad 2: That is due to the fact that your TV apparently is set to overscan: you should not do that. But if you do, you can correct this via the OSD-settings

ad 3: I f you had any idea what betatesting is about, you would not have mentioned this. Or at least not in this way.
We do put a lot of effort in testing as much plugins as possible. We even repaired plugins of which other image makers simply say "you must ask the plugin maker to repair it". And we took out a number of plugins that we can't repair.
But you can't seriously expect us to test every possible plugin in every possible hard- and software combination. Or if you do, testing would take month instead of weeks: is that what you want, just for a plugin?

Dont tell what my TV is set to when you dont even know the model.
It is NOT set to overscan.
As for beta testing give me a break I was a beta tester on nabilosat before they broke off; and it just so happens to be the Pli skin that is causing the box to hang.
If you guys want to deliver a image that contains downloadable plugins that dont work or are out of date eg fan plugin thats your problem.

 

[Rob van der Does]

OK, as you apparently know everything much better then we do, don't expect any answers any more

Dont tell what my TV is set to when you dont even know the model.
It is NOT set to overscan.

Well, not so difficult: the TV make & model have nothing to do with that. Your description was clear enough to draw the most probable conclusion........