Wifi USB working?

[punisher]

ignore i posted something in the wrong section lol

 

[Sicilian]

What version is your TP-Link stick?

 

[rte]

I wonder if any driver update is coming fo ViX? My D-Link works with VTi.

 

[rte]

Its label doesn't say it.

 

[stanley1]

I have TP-Link TL-WN321G V2, what driver do I need to install from plugins.

 

[rte]

What version is your TP-Link stick?

I see now on the label of my TP-link TL-WN821N this: FCC ID: TN7WN821NV1, I wonder if V1 is the version number?

 

[stanley1]

yes correct, mine is TL-WN321G V2

 

[andyblac]

Yes, so sad.
I have three Wlan sticks:
D-Link DWL-G122
TP-link TL-WN821N
Belkin F5D9050B Wireless G Plus MIMO USB Network Adapter #6 (complies with RSS-210)
They all work perfectly with PC but None of them works in Vu+Duo ViX 2.
Do I have any hope with these in the future or should I try to find somewhere the one that works?

can you do a favour, plugin the stick reboot, dont touch remote, telnet into to the box and run:

dmesg


and post output


cheers andy

 

[rte]

can you do a favour, plugin the stick reboot, dont touch remote, telnet into to the box and run:

dmesg


and post output


cheers andy

This is what I get:
---

hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd_brcm_init: Initializing 2 OHCI controller(s)
2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (OHCI-brcm-0)
drivers/usb/host/ohci-brcm.c: starting brcm OHCI USB Controller
- Resetting at b0480408
<-- brcm_start_hc
brcm-ohci-0 brcm-ohci-0.0: BRCM OHCI
brcm-ohci-0 brcm-ohci-0.0: new USB bus registered, assigned bus number 3
brcm-ohci-0 brcm-ohci-0.0: irq 63, io mem 0x10480400
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb 1-1: new high speed USB device using brcm-ehci and address 2
2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (OHCI-brcm-1)
drivers/usb/host/ohci-brcm.c: starting brcm OHCI USB Controller
- Resetting at b0480608
<-- brcm_start_hc
brcm-ohci-1 brcm-ohci-1.1: BRCM OHCI
brcm-ohci-1 brcm-ohci-1.1: new USB bus registered, assigned bus number 4
brcm-ohci-1 brcm-ohci-1.1: irq 64, io mem 0x10480600
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 1-1: configuration #1 chosen from 1 choice
pegasus: v0.6.13 (2005/11/13), Pegasus/Pegasus II USB Ethernet driver
usb 1-2: new high speed USB device using brcm-ehci and address 3
usb 1-2: configuration #1 chosen from 1 choice
usbcore: registered new driver pegasus
drivers/usb/net/rtl8150.c: rtl8150 based usb-ethernet driver v0.6.2 (2004/08/27)
usbcore: registered new driver rtl8150
usbcore: registered new driver asix
usbcore: registered new driver cdc_ether
usbcore: registered new driver net1080
usbcore: registered new driver zaurus
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
VFS: Mounted root (jffs2 filesystem).
Freeing unused kernel memory: 140k freed
usbcore: registered new driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
usbcore: registered new driver usbserial_generic
drivers/usb/serial/usb-serial.c: USB Serial Driver core
drivers/usb/serial/usb-serial.c: USB Serial support registered for Belkin / Pera
com / GoHubs USB Serial Adapter
usbcore: registered new driver belkin
drivers/usb/serial/belkin_sa.c: USB Belkin Serial converter driver v1.2
dvb_bcm7335: module license 'Proprietary' taints kernel.
$Id: bcm7335_init.c Ver. 0.1$
DVB: registering new adapter (BM750S)
bcm7335: hotplug_callback():
Hotplug - status.connected 0
brcm_demux_init: $Id: bcm7335_demux.c,v 0.6 $
[VID]: <6>bcm7335_video_init
[AUD]: <6>bcm7335_audio_init
[AUD]: Open sync channel for decode
DVB: registering adapter 0 frontend 0 (BCM7335 FE)...
DVB: registering adapter 0 frontend 0 (BCM7335 FE)...
bcm7335: hotplug_callback():
Hotplug - status.connected 1
bcm7335: hotplug_callback():
Hotplug - connecting HDMI to display 0xe
[MPVR]: >> misc_pvr_init
input: dreambox remote control (native) as /class/input/input0
[LCD]: registered
[CI]:-BM750_PCB_2_1

[CI]: registered ci0
[CI]: registered ci1
[DFP]: registered dbox fp
[DFP]: bcm7335_i2c_write: Error 1114113

[DFP]: bcm7335_max_i2c_write: Error 1114113

[DFP]: Scart 4707 is found 4

[SC]: registered sci0
[SC]: registered sci1
bm750_system_time_set wakeup mode get
bm750_system_time_set wakeup mode get 0xc4
procmk_init
drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI USB Seri
al Device
usbcore: registered new driver ftdi_sio
drivers/usb/serial/ftdi_sio.c: v1.4.3:USB FTDI Serial Converters Driver
drivers/usb/serial/usb-serial.c: USB Serial support registered for Keyspan - (wi
thout firmware)
drivers/usb/serial/usb-serial.c: USB Serial support registered for Keyspan 1 por
t adapter
drivers/usb/serial/usb-serial.c: USB Serial support registered for Keyspan 2 por
t adapter
drivers/usb/serial/usb-serial.c: USB Serial support registered for Keyspan 4 por
t adapter
usbcore: registered new driver keyspan
drivers/usb/serial/keyspan.c: v1.1.4:Keyspan USB to Serial Converter Driver
NTFS driver 2.1.27 [Flags: R/W MODULE].
drivers/usb/serial/usb-serial.c: USB Serial support registered for pl2303
usbcore: registered new driver pl2303
drivers/usb/serial/pl2303.c: Prolific PL2303 USB to serial adaptor driver
rtusb init --->
usbcore: registered new driver rt2870
usbcore: registered new driver rt73
libata version 2.00 loaded.
brcm-pm: enabling power to SATA block
sata_svw 0000:01:00.0: version 4.0
ata1: SATA max UDMA/133 cmd 0xB0510000 ctl 0xB0510020 bmdma 0xB0510030 irq 42
ata2: SATA max UDMA/133 cmd 0xB0510100 ctl 0xB0510120 bmdma 0xB0510130 irq 42
scsi0 : sata_svw
ata1: SATA link down (SStatus 4 SControl 300)
ATA: abnormal status 0x7F on port 0xb051001c
scsi1 : sata_svw
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl F0000)
ata2.00: ATA-8, max UDMA/133, 625142448 sectors: LBA48 NCQ (depth 0/32)
ata2.00: ata2: dev 0 multi count 0
ata2.00: configured for UDMA/133
Vendor: ATA Model: WDC WD3200AAKS-0 Rev: 01.0
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
sda: sda1
sd 1:0:0:0: Attached scsi disk sda
sd 1:0:0:0: Attached scsi generic sg0 type 0
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SGI XFS with no debug enabled
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_SELECT_SOURCE 1
[VID]: VIDEO_PLAY 1 2 0
[VID]: VIDEO_CONTINUE 1 1
[VID]: VIDEO_CLEAR_BUFFER 1 1 0
[VID]: VIDEO_STOP 0 1
[VID]: VIDEO_SELECT_SOURCE 0
Installing knfsd (copyright (C) 1996 [email protected]).
usbkhelper: dreambox acceleration not detected
usbkhelper: device is attached to a USB 2.0 bus
usbkhelper: using isoc transfer
usbkhelper: registered /dev/ngdvr0
usbkhelper: mknod /dev/ngdvr0 c 254 0
usbcore: registered new driver usb_khelper
Initializing Sundtek USB khelper
Copyright (C) 2010 Sundtek Ltd
DVB: registering adapter 0 frontend 0 (Sundtek DVB-C)...
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_SELECT_SOURCE 1
[VID]: VIDEO_PLAY 1 2 0
[VID]: VIDEO_CONTINUE 1 1
[VID]: VIDEO_CLEAR_BUFFER 1 1 0
[VID]: VIDEO_STOP 0 1
[VID]: VIDEO_SELECT_SOURCE 0
[CI]:ci_dev_open

[CI]:Opening A GPIO's for 7335 platform

[CI]:Opening A GPIO's for 7335 platform....done

[CI]:entering.. A NEXUS_DvbCi_Open

[CI]:NEXUS_DvbCi_Open done..

[CI]:Installing callbacks

[CI]:Forcing card check

[CI]:Card insertion status changed

[CI]:Opening B GPIO's for 7335 platform

[CI]:Opening B GPIO's for 7335 platform....done

[CI]:entering.. B NEXUS_DvbCi_Open

[CI]:NEXUS_DvbCi_Open done..

[CI]:Installing callbacks

[CI]:Forcing card check

[CI]:Card B insertion status changed

[CI]: CI interface initialised

[CI]:ci1_dev_open

[CI]:NEXUS_Remux_Start

[CI]:>>slot 0 inserted

[CI]:>>close_mpod tuner:0

[CI]:remux stop

[CI]:get_remux_startcnt() count : 1

[CI]:get_remux_startcnt() count : 1

[CI]:>>close_mpod tuner:1

[CI]:remux stop

[CI]:get_remux_startcnt() count : 0

[CI]:get_remux_startcnt() count : 0

[CI]:bm750_slot_reset slot:0
[CI]:changing to DVB Mode slot 0

[CI]:bm750_slot_ts_enable slot:0
[CI]: in_reset: register_slot(0)

[CI]: reset: new_tc(0)

[DFP]: unknown cmd 0x0000
[DFP]: unknown cmd 0x0009
[CI]:>>bm750_transport_callback connection_id : 1, slot id : 0 reason : 0 slot :
0

!!!reset oldtime
[CI]:>>bm750_transport_callback connection_id : 1, slot id : 0 reason : 2 slot :
0

[CI]:>>bm750_transport_callback free : 65534, data_length : 6 reason : 2

[CI]:>>bm750_transport_callback connection_id : 1, slot id : 0 reason : 2 slot :
0

[CI]:>>bm750_transport_callback free : 65525, data_length : 6 reason : 2

[CI]:>>bm750_transport_callback connection_id : 1, slot id : 0 reason : 2 slot :
0

[CI]:>>bm750_transport_callback free : 65516, data_length : 6 reason : 2

[AUD]: AUDIO_SET_MUTE 0
[AUD]: AUDIO_SET_MIXER -2049368608
[AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0
[AUD]: AUDIO_SET_MIXER : next left volume 0, right volume 0
[AUD]: AUDIO_SET_MIXER : next left volume -200, right volume -200
[AUD]: AUDIO_SET_MIXER -2049368608
[AUD]: AUDIO_SET_MIXER : amixl 10, amixr 10
[AUD]: AUDIO_SET_MIXER : next left volume -200, right volume -200
[AUD]: AUDIO_SET_MIXER : next left volume -914, right volume -914
[CI]:ci_dev_poll :: POLLIN

[CI]:ci_dev_ioctl cmd : 0

[CI]:unknown cmd 0x0000
[CI]:ci_dev_poll :: POLLIN

[CI]:ci_dev_poll :: POLLIN

[CI]:>>bm750_transport_callback connection_id : 1, slot id : 0 reason : 2 slot :
0

[CI]:>>bm750_transport_callback free : 65534, data_length : 28 reason : 2

[CI]:ci_dev_poll :: POLLIN

[CI]:>>bm750_transport_callback connection_id : 1, slot id : 0 reason : 2 slot :
0

[CI]:>>bm750_transport_callback free : 65534, data_length : 29 reason : 2

[CI]:ci_dev_poll :: POLLIN

FE tune
[CI]:>>bm750_transport_callback connection_id : 1, slot id : 0 reason : 2 slot :
0

[CI]:>>bm750_transport_callback free : 65534, data_length : 64 reason : 2

[CI]:ci_dev_poll :: POLLIN

[AUD]: AUDIO_SET_BYPASS_MODE 1
[AUD]: proc_get_ac3 1 bcm7335->audio_passthrough_spdif : 0
[AUD]: AUDIO_PAUSE 1
[AUD]: AUDIO_PLAY 1 decoder start : 0
[AUD]: bcm7335->audio_dec_ss.codec 1
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_FREEZE 1 0
[VID]: VIDEO_PLAY 1 2 2
[VID]: VIDEO_SLOWMOTION 0 1
[VID]: VIDEO_FAST_FORWARD 0 1
[VID]: VIDEO_CONTINUE 1 1
[AUD]: AUDIO_CONTINUE 1 1 audio pid_hndl : 0xc0a0d7fc
[AUD]: setting mute : 0
[AUD]: AUDIO_CHANNEL_SELECT 0
!!!reset oldtime
root@vuduo:~#

 

[stanley1]

I have TP-Link TL-WN321G V2, what driver do I need to install from plugins.

Anyone got a clue for this wireless stick.

TIA

 

[stanley1]

downloaded rt73 driver from packet management but it comes up as "0 packages downloaded".

 

[Righthammer]

Cant get my Belkin F5D7050 (ver 4003 uk) to work with the new image Vix 2.0. Worked with 1.3 with no issues.

 

[marty]

Cant get my Belkin F5D7050 (ver 4003 uk) to work with the new image Vix 2.0. Worked with 1.3 with no issues.

As I said in an earlier post I have 3 wifi sticks that work great in VIX 1.2 and 1.3 but are VERY troublesome in VIX 2.0 works OK from a cold boot but doesn't work after a reboot (even thought it says its connected)
I've gone back to VIX 1.3 as a temp measure for now.

 

[Righthammer]

As I said in an earlier post I have 3 wifi sticks that work great in VIX 1.2 and 1.3 but are VERY troublesome in VIX 2.0 works OK from a cold boot but doesn't work after a reboot (even thought it says its connected)
I've gone back to VIX 1.3 as a temp measure for now.

Yep I may go back to 1.3 for now ..was looking forward to trying out the new usb dtt drivers but that may have to wait until the wifi network issues are sorted.

 

[marty]

Yep I may go back to 1.3 for now ..was looking forward to trying out the new usb dtt drivers but that may have to wait until the wifi network issues are sorted.

Read post #5 of this thread, thats 3 people with the same problem

 

[regarto]

The solution to my wifi problems was to place the attached file in this folder and overwriting the existent followed by a restart:

lib/modules/2.6.18-7.3/kernel/drivers/net/

Give it a try.

 

[stanley1]

thanks, but no luck with that fix.

 

[rte]

No effect for me either.

 

[stanley1]

The solution to my wifi problems was to place the attached file in this folder and overwriting the existent followed by a restart:

lib/modules/2.6.18-7.3/kernel/drivers/net/

Give it a try.

ok, clean install, replaced file and now it works, many thanks.

 

[stanley1]

Just to update, I rebooted this morning and lost wlan connection, it's showing as ok in network (railink rt73 wlan adapter) but when I go to software update it says "your network is not working", maybe go back to 1.3 till developers have a look at it. Anyone manage to get wlan working and what stick you're using.