[VU+ Solo2] VU Solo2 ViX Image Discussion

[rizl4]

had to re install the image box was stuck on loading for like 5mins and loads fresh install seems fine but for how long

 

[mickyblueys]

dont like the vixx skins also every time you add a new skin to have to adjust the size of it so annoying
the interface setting
Had 2 crashes already ;/

Could this not be down to "overscan" still being enabled on your tv?? I would get clarification from a mod. As I'm not 100% on changing skins. I personally find the default one top notch.



Sent from my GT-I9100 using Tapatalk 2

 

[Larry-G]

Could this not be down to "overscan" still being enabled on your tv?? I would get clarification from a mod. As I'm not 100% on changing skins. I personally find the default one top notch.



Sent from my GT-I9100 using Tapatalk 2

Certainly can be if the OP has not disabled overscan from his TV side, we dont hide overscan like most other images do, we only use HD skins

 

[rizl4]

My tv does not have any overscan setting

My applogise seems you only need to change the screen position once I must have tried SD skin which changed the position
Im now on night skin like it best would be nice if we can get some more skins added?

its also strange on some skins when the box starts you get all this green flickering it starts fine just few blinks of the green what is that?
default skin loads fine no green flicks
its not a problem i just like to know these things


i can never seem to get vu box to show under my network pc with vixx image
but with BH image it shows up

 

[bluepeter]

Repeatable crash - build 632 - select any bouquet, press EPG to give single EPG list, click OK button on the first program in list or any program in list box crashes. Crash log sent.

Regards
Peter

 

[Tkr001]

Repeatable crash - build 632 - select any bouquet, press EPG to give single EPG list, click OK button on the first program in list or any program in list box crashes. Crash log sent.

Regards
Peter

You really should open a thread for this. This general discussion is not the place to report problems.

 

[rassi]

Adding timers has had to take loooong time, at least 30 sec it rotates VIX letters on screen before it adds it.
It has been much much faster. Using 632

 

[2stein]

i have problems with the advanced picture quality settings.
according to my observation they don't seem to be set during boot, and only if you go into the configuration menu.
szenario: i change the settings (e.g. brightness, color, etc), press use this setting, everything is fine. i reboot. picture is default again. i go into the settings... settings are still there but i have to slightly change them and press use these settings to set them again.
anybody else seen this?
thanks.

 

[rassi]

umm. why Timers.xml makes some logs to itself?
My timers.xml is now size of 47MB!?
Past timers has been cleaned etc.

one timer entry example:

<timer begin="1364410800" end="1364414400" serviceref="1:134:1:0:0:0:0:0:0:0:FROM BOUQUET "alternatives.sub_0.tv" ORDER BY bouquet" repeated="4" name="Kurjat kuppilat USA - Kitchen Nightmares USA" description="" afterevent="auto" eit="32236" tags="" disabled="0" justplay="0" descramble="1" record_ecm="1" isAutoTimer="0">
<log code="15" time="1361289073">record time changed, start prepare is now: Wed Feb 20 20:59:40 2013</log>
<log code="15" time="1360996131">record time changed, start prepare is now: Wed Feb 20 20:59:40 2013</log>
<log code="15" time="1360907658">record time changed, start prepare is now: Wed Feb 20 20:59:40 2013</log>
<log code="15" time="1360783701">record time changed, start prepare is now: Wed Feb 13 20:59:40 2013</log>
<log code="15" time="1360738411">record time changed, start prepare is now: Wed Feb 13 20:59:40 2013</log>
<log code="15" time="1360601374">record time changed, start prepare is now: Wed Feb 13 20:59:40 2013</log>
<log code="15" time="1360581388">record time changed, start prepare is now: Wed Feb 13 20:59:40 2013</log>
<log code="15" time="1360579145">record time changed, start prepare is now: Wed Feb 13 20:59:40 2013</log>
<log code="15" time="1360578749">record time changed, start prepare is now: Wed Feb 13 20:59:40 2013</log>
<log code="15" time="1360345094">record time changed, start prepare is now: Wed Feb 13 20:59:40 2013</log>
<log code="15" time="1360297879">record time changed, start prepare is now: Wed Feb 13 20:59:40 2013</log>
<log code="15" time="1360258637">record time changed, start prepare is now: Wed Feb 13 20:59:40 2013</log>
<log code="15" time="1360258291">record time changed, start prepare is now: Wed Feb 13 20:59:40 2013</log>
<log code="15" time="1360255559">record time changed, start prepare is now: Wed Feb 13 20:59:40 2013</log>
<log code="15" time="1360255358">record time changed, start prepare is now: Wed Feb 13 20:59:40 2013</log>
<log code="15" time="1360181988">record time changed, start prepare is now: Wed Feb 13 20:59:40 2013</log>
<log code="15" time="1360172547">record time changed, start prepare is now: Wed Feb  6 20:59:40 2013</log>
<log code="15" time="1360158342">record time changed, start prepare is now: Wed Feb  6 20:59:40 2013</log>
<log code="15" time="1360124610">record time changed, start prepare is now: Wed Feb  6 20:59:40 2013</log>
<log code="15" time="1360007010">record time changed, start prepare is now: Wed Feb  6 20:59:40 2013</log>
<log code="15" time="1360001029">record time changed, start prepare is now: Wed Feb  6 20:59:40 2013</log>
<log code="5" time="1360177180">activating state 1</log>
<log code="0" time="1360177180">Found enough free space to record</log>
<log code="0" time="1360177180">Filename calculated as: &apos;/media/hdd/movie/20130206 2100 - Sub - Kurjat kuppilat USA - Kitchen Nightmares USA&apos;</log>
<log code="16" time="1360177180">record event 6</log>
<log code="16" time="1360177180">record event 2</log>
<log code="6" time="1360177180">prepare ok, waiting for begin</log>
<log code="16" time="1360177180">record event 6</log>
<log code="16" time="1360177180">record event 9</log>
<log code="5" time="1360177200">activating state 2</log>
<log code="11" time="1360177200">start recording</log>
<log code="16" time="1360177200">record event 0</log>
<log code="16" time="1360177200">record event 4</log>
<log code="16" time="1360177230">record event 9</log>
<log code="5" time="1360180800">activating state 3</log>
<log code="12" time="1360180800">stop recording</log>
<log code="16" time="1360180800">record event 5</log>
<log code="16" time="1360180800">record event 1</log>
<log code="15" time="1360180800">record time changed, start prepare is now: Wed Feb 13 20:59:40 2013</log>
<log code="5" time="1360781980">activating state 1</log>
<log code="0" time="1360781980">Found enough free space to record</log>
<log code="0" time="1360781980">Filename calculated as: &apos;/media/hdd/movie/20130213 2100 - Sub - Kurjat kuppilat USA - Kitchen Nightmares USA&apos;</log>
<log code="16" time="1360781980">record event 3</log>
<log code="6" time="1360781980">prepare ok, waiting for begin</log>
<log code="16" time="1360781984">record event 3</log>
<log code="16" time="1360781989">record event 3</log>
<log code="16" time="1360781995">record event 3</log>
<log code="5" time="1360782000">activating state 2</log>
<log code="11" time="1360782000">start recording</log>
<log code="16" time="1360782000">record event 0</log>
<log code="16" time="1360782000">record event 3</log>


*********Removed hundreds of lines from here "event 3 messages**************





<log code="5" time="1360783701">activating state 1</log>
<log code="0" time="1360783701">Not enough free space to record</log>
<log code="5" time="1360783701">activating state 2</log>
<log code="5" time="1360783706">activating state 3</log>
<log code="12" time="1360783706">stop recording</log>
<log code="15" time="1360783706">record time changed, start prepare is now: Wed Feb 20 20:59:40 2013</log>
<log code="0" time="1360783879">Filename calculated as: &apos;/media/hdd/movie/20130220 2100 - Sub - Kurjat kuppilat USA - Kitchen Nightmares USA&apos;</log>
<log code="5" time="1361386780">activating state 1</log>
<log code="0" time="1361386780">Found enough free space to record</log>
<log code="0" time="1361386780">Filename calculated as: &apos;/media/hdd/movie/20130220 2100 - Sub - Kurjat kuppilat USA - Kitchen Nightmares USA&apos;</log>
<log code="16" time="1361386780">record event 6</log>
<log code="16" time="1361386780">record event 2</log>
<log code="6" time="1361386781">prepare ok, waiting for begin</log>
<log code="16" time="1361386781">record event 9</log>
<log code="16" time="1361386781">record event 6</log>
<log code="5" time="1361386800">activating state 2</log>
<log code="11" time="1361386800">start recording</log>
<log code="16" time="1361386800">record event 0</log>
<log code="16" time="1361386800">record event 4</log>
<log code="16" time="1361386830">record event 9</log>
<log code="5" time="1361388506">activating state 3</log>
<log code="12" time="1361388506">stop recording</log>
<log code="16" time="1361388506">record event 5</log>
<log code="16" time="1361388506">record event 1</log>
<log code="15" time="1361388506">record time changed, start prepare is now: Wed Feb 27 20:59:40 2013</log>
<log code="15" time="1361388658">record time changed, start prepare is now: Wed Feb 20 20:59:40 2013</log>
<log code="5" time="1361388658">activating state 1</log>
<log code="0" time="1361388658">Found enough free space to record</log>
<log code="0" time="1361388658">Filename calculated as: &apos;/media/hdd/movie/20130220 2100 - Sub - Kurjat kuppilat USA - Kitchen Nightmares USA_001&apos;</log>
<log code="16" time="1361388658">record event 6</log>
<log code="16" time="1361388658">record event 2</log>
<log code="6" time="1361388658">prepare ok, waiting for begin</log>
<log code="5" time="1361388658">activating state 2</log>
<log code="11" time="1361388658">start recording</log>
<log code="16" time="1361388658">record event 0</log>
<log code="16" time="1361388658">record event 4</log>
<log code="16" time="1361388658">record event 9</log>
<log code="16" time="1361388658">record event 4</log>
<log code="16" time="1361388658">record event 6</log>
<log code="15" time="1361390783">record time changed, start prepare is now: Wed Feb 27 20:59:40 2013</log>
<log code="5" time="1361991582">activating state 1</log>
<log code="0" time="1361991582">Found enough free space to record</log>
<log code="0" time="1361991582">Filename calculated as: &apos;/media/hdd/movie/20130227 2100 - Sub - Kurjat kuppilat USA - Kitchen Nightmares USA&apos;</log>
<log code="6" time="1361991582">prepare ok, waiting for begin</log>
<log code="16" time="1361991583">record event 6</log>
<log code="16" time="1361991583">record event 2</log>
<log code="16" time="1361991583">record event 9</log>
<log code="16" time="1361991583">record event 6</log>
<log code="5" time="1361991600">activating state 2</log>
<log code="11" time="1361991600">start recording</log>
<log code="16" time="1361991600">record event 0</log>
<log code="16" time="1361991600">record event 4</log>
<log code="16" time="1361991629">record event 9</log>
<log code="5" time="1361995200">activating state 3</log>
<log code="12" time="1361995200">stop recording</log>
<log code="16" time="1361995200">record event 5</log>
<log code="16" time="1361995200">record event 1</log>
<log code="15" time="1361995201">record time changed, start prepare is now: Wed Mar  6 20:59:40 2013</log>
<log code="5" time="1362596382">activating state 1</log>
<log code="0" time="1362596382">Found enough free space to record</log>
<log code="0" time="1362596382">Filename calculated as: &apos;/media/hdd/movie/20130306 2100 - Sub - Kurjat kuppilat USA - Kitchen Nightmares USA&apos;</log>
<log code="6" time="1362596382">prepare ok, waiting for begin</log>
<log code="16" time="1362596383">record event 6</log>
<log code="16" time="1362596383">record event 2</log>
<log code="16" time="1362596383">record event 6</log>
<log code="16" time="1362596384">record event 9</log>
<log code="5" time="1362596400">activating state 2</log>
<log code="11" time="1362596400">start recording</log>
<log code="16" time="1362596400">record event 0</log>
<log code="16" time="1362596400">record event 4</log>
<log code="16" time="1362596410">record event 9</log>
<log code="16" time="1362596996">record event 4</log>
<log code="16" time="1362596996">record event 6</log>
<log code="16" time="1362596996">record event 4</log>
<log code="16" time="1362596996">record event 2</log>
<log code="16" time="1362596996">record event 4</log>
<log code="16" time="1362596996">record event 6</log>
<log code="16" time="1362596997">record event 9</log>
<log code="16" time="1362598756">record event 4</log>
<log code="16" time="1362598756">record event 6</log>
<log code="16" time="1362598756">record event 4</log>
<log code="16" time="1362598756">record event 2</log>
<log code="16" time="1362598757">record event 4</log>
<log code="16" time="1362598757">record event 6</log>
<log code="16" time="1362598757">record event 9</log>
<log code="5" time="1362600000">activating state 3</log>
<log code="12" time="1362600000">stop recording</log>
<log code="16" time="1362600000">record event 5</log>
<log code="16" time="1362600000">record event 1</log>
<log code="15" time="1362600001">record time changed, start prepare is now: Wed Mar 13 20:59:40 2013</log>
<log code="5" time="1363201182">activating state 1</log>
<log code="0" time="1363201182">Found enough free space to record</log>
<log code="0" time="1363201182">Filename calculated as: &apos;/media/hdd/movie/20130313 2100 - Sub - Kurjat kuppilat USA - Kitchen Nightmares USA&apos;</log>
<log code="6" time="1363201182">prepare ok, waiting for begin</log>
<log code="16" time="1363201185">record event 6</log>
<log code="16" time="1363201185">record event 2</log>
<log code="16" time="1363201185">record event 6</log>
<log code="16" time="1363201185">record event 9</log>
<log code="5" time="1363201201">activating state 2</log>
<log code="11" time="1363201201">start recording</log>
<log code="16" time="1363201201">record event 0</log>
<log code="16" time="1363201201">record event 4</log>
<log code="16" time="1363201241">record event 9</log>
<log code="16" time="1363201883">record event 4</log>
<log code="16" time="1363201883">record event 6</log>
<log code="16" time="1363201883">record event 4</log>
<log code="16" time="1363201883">record event 2</log>
<log code="16" time="1363201883">record event 4</log>
<log code="16" time="1363201883">record event 6</log>
<log code="16" time="1363201884">record event 9</log>
<log code="16" time="1363202968">record event 4</log>
<log code="16" time="1363202968">record event 6</log>
<log code="16" time="1363202968">record event 4</log>
<log code="16" time="1363202968">record event 2</log>
<log code="16" time="1363202968">record event 4</log>
<log code="16" time="1363202968">record event 6</log>
<log code="16" time="1363202969">record event 9</log>
<log code="16" time="1363203985">record event 4</log>
<log code="16" time="1363203985">record event 6</log>
<log code="16" time="1363203985">record event 4</log>
<log code="16" time="1363203985">record event 2</log>
<log code="16" time="1363203985">record event 4</log>
<log code="16" time="1363203985">record event 6</log>
<log code="16" time="1363203986">record event 9</log>
<log code="5" time="1363204800">activating state 3</log>
<log code="12" time="1363204800">stop recording</log>
<log code="16" time="1363204800">record event 5</log>
<log code="16" time="1363204800">record event 1</log>
<log code="15" time="1363204801">record time changed, start prepare is now: Wed Mar 20 20:59:40 2013</log>
<log code="5" time="1363806001">activating state 1</log>
<log code="0" time="1363806001">Found enough free space to record</log>
<log code="0" time="1363806001">Filename calculated as: &apos;/media/hdd/movie/20130320 2100 - Sub - Kurjat kuppilat USA - Kitchen Nightmares USA&apos;</log>
<log code="16" time="1363806001">record event 6</log>
<log code="16" time="1363806001">record event 2</log>
<log code="6" time="1363806001">prepare ok, waiting for begin</log>
<log code="5" time="1363806001">activating state 2</log>
<log code="11" time="1363806001">start recording</log>
<log code="16" time="1363806001">record event 0</log>
<log code="16" time="1363806001">record event 4</log>
<log code="16" time="1363806002">record event 9</log>
<log code="16" time="1363806002">record event 4</log>
<log code="16" time="1363806002">record event 6</log>
<log code="16" time="1363806025">record event 9</log>
<log code="5" time="1363809600">activating state 3</log>
<log code="12" time="1363809600">stop recording</log>
<log code="16" time="1363809600">record event 5</log>
<log code="16" time="1363809600">record event 1</log>
<log code="15" time="1363809631">record time changed, start prepare is now: Wed Mar 27 20:59:40 2013</log>
<log code="5" time="1364410854">activating state 1</log>
<log code="0" time="1364410854">Found enough free space to record</log>
<log code="0" time="1364410854">Filename calculated as: &apos;/media/hdd/movie/20130327 2100 - Sub - Kurjat kuppilat USA - Kitchen Nightmares USA&apos;</log>
<log code="16" time="1364410854">record event 6</log>
<log code="16" time="1364410854">record event 2</log>
<log code="6" time="1364410854">prepare ok, waiting for begin</log>
<log code="5" time="1364410854">activating state 2</log>
<log code="11" time="1364410854">start recording</log>
<log code="16" time="1364410854">record event 0</log>
<log code="16" time="1364410855">record event 4</log>
<log code="16" time="1364410855">record event 9</log>
<log code="16" time="1364410855">record event 4</log>
<log code="16" time="1364410855">record event 6</log>
</timer>

 

[kostikos]

Guys, is there a reason why I cannot connect to the Vu+ player android app? Same settings were working great with other images..

 

[tomthebomb1968]

I think if you have it set up the same as before you will find that it still works ok even though it says not connected. Thats my experience anyway.

Guys, is there a reason why I cannot connect to the Vu+ player android app? Same settings were working great with other images..

 

[kostikos]

Lol! Indeed it says it can't connect, but it works anyway That's wierd! Thnx!

 

[rizl4]

can anyone help me find iptv plugin

 

[Larry-G]

can anyone help me find iptv plugin

What do you mean by Iptv ?. For example we have a plugin in the feeds called OnDemand for the BBC iplayer and more.

Sent from my GT-I9300 using Tapatalk 2

 

[rizl4]

thought there was an IPTV plugin for internet tv from providers i can get accounts from people to watch internet tv nah not bbci etc

 

[Trial]

Hi,
there is nothing like THE IPTV. IPTV simply means TV over the internet and there are 100th of variations. You need to be a bit more specific.

ciao

 

[Larry-G]

Guys please remember that this thread is only meant to be a general Image release and discussion thread, it is not intended nor suitable as a one fits all technical help thread.

Please if you need help make a dedicated thread detailing your issues with as much supporting information as possible.

such as what image and build version you are using ?.
what if any plugins you have installed either from the feeds or otherwise.
what skin your using
and a brief but detailed explanation of what is happening, and any supporting debug or crash logs you can give us otherwise it is very hard for us to offer help.

for now i am going to lock this thread until i get a chance to clean it out as rite now there are too many people asking for help and their posts are getting lost in the clutter.

 

[Rob van der Does]

Thanks for the quick reply. "AMRITA, DIVINE TV, ASIANET, ASIANE PLUS" etc. channels from 9E have the problem.

You're right. No idea why this is: I'll make a bugreport for that.

As far as I can see this has been fixed (but I can't receive all channels). Can you confirm that?

 

[bobby-]

just updated my vusolo2 to 3.0-665 and 23e is not working

 

[danivtec]

Getting a crash on 665 when transcoding is enabled and trying to stream from the built in Transcoder tv box in openwebif. This is a fresh flash from 664 to 665, also tried on 664 before upgrading and same result. Streaming from the port 8001 is fine.

Crash log attached.