[VU+ Solo2] Help with wierd error messages

[raedkuwait]

Not a easy a you think to reproduce.
If you can state box used, build used & exact easy to follow readable steps, it might help.

http://www.world-of-satellite.com/showthread.php?48757-major-crash

 

[bbbuk]

How are you connected? Wired direct to router? Homeplugs? Wifi? USB flash or couch flash? Virgin or BT Hub? Any network switch?

I use a Solo2 and it was a usb flash with no restore of settings (I generally always manually change settings). It's connected via Ethernet via HomePlugs.

Neither the Ethernet or homeplugs have changed.

I'll try again on 21 tomorrow and see how it goes and if there is a pattern to it (ie I can re-create it again).

 

[duoduo]

Late to the party but I have also had this but only a couple of times usually been in the morning. Just out of interest im with virgin media for bb, what about everyone else who had the issue? I am convinced it is something to do with network..

 

[jameschapmanbutchers]

Ok after running fine for 5-6 hours kaboom back to faults r us.. same errors as attached. now though I cant ftp the box?. was going to get logs and now cant ftp since the error. see attached. Also my mate in Glasgow called to say he downloaded a plugin and now he suffering same issues. how else can I get these logs out?

 

[jameschapmanbutchers]

I have the file crash log etc but how to I post?

ive send via box to the vix team via online method though..

 

[kill_bill]

Success! Crashed after about 40 minutes from clean install with no plugins (was on Xbox so not exactly sure on time). On reboot got Onlineversioncheck error.

Just trying to retrieve logs now

 

[jameschapmanbutchers]

kill_bill it gotta be something its getting a response or down from ? ive changed versions and still does. so that rules out say one image. it has to be something that the software did look at before but now gets / the big nae nae, causing it to crash.

Also to Add once the crash happens the plugin/ downloadable plugins no longer works. it says no more plugins available.

Also you then cant ftp the box.

I really want to stick with vix images as love them. patience for a fix

 

[kill_bill]

Dam, after the box crashes I can't get into it even via FTP. Going to have to restore again and install samba so hopefully I can grab it via Windows.

 

[duoduo]

Can you disconnect Internet and try watching TV for a while and see what happens if anything?

 

[kill_bill]

Changed the log location to hdd and set up to email. Here goes again!

 

[jameschapmanbutchers]

<?xml version="1.0" encoding="utf-8"?>
<openvix>
<enigma2>
<crashdate>Fri Nov 6 19:27:26 2015</crashdate>
<compiledate>Nov 3 2015</compiledate>
<contactemail>[email protected]</contactemail>
<!-- Please email this crashlog to above address -->
<skin>Blue-HD/skin.xml</skin>
<sourcedate>2015-11-03</sourcedate>
<version>3.0.0</version>
</enigma2>
<image>
<stbmodel>solo2</stbmodel>
<kernelversion>
<![CDATA[
Linux vusolo2 3.13.5 #1 SMP Fri Oct 16 11:58:14 BST 2015 mips GNU/Linux
]]>
</kernelversion>
<kernelcmdline>ubiroot rootflags=sync bmem=192M@64M bmem=256M@512M ubi.mtd=rootfs rootfstype=ubifs root=ubi0:rootfs</kernelcmdline>
<nimsockets>NIM Socket 0:</nimsockets>
<imageversion>
<![CDATA[
box_type=vusolo2
build_type=
version=3.2
type=release
build=021
date=20151103144522
comment=OpenViX
target=9
creator=OpenViX
url=http://www.world-of-satellite.com
catalog=http://www.world-of-satellite.com
]]>
</imageversion>
<imageissue>
<![CDATA[
Welcome to OpenViX for %h
openvix 3.2 %h

]]>
</imageissue>
</image>
<crashlogs>
<enigma2crashlog>
<![CDATA[
transponder time looks ok
< 18730.625306> [eDVBLocalTimerHandler] time update to 18:58:09
< 18730.625381> [eDVBLocalTimerHandler] m_time_difference is 1
< 18730.625415> [eDVBLocalTimerHandler] set Linux Time
< 18730.625959> [eDVBChannel] getDemux cap=00
< 18742.400924> [eEPGCache] FS subtable (60190100) version changed (22) now/next (1)
< 18841.024735> [eDVBServicePlay] timeshift
< 18841.025904> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 18841.026102> [eDVBSectionReader] DMX_SET_FILTER pid=18
< 18842.025548> [eDVBServicePlay] timeshift
< 18876.388458> [eEPGCache] FS subtable (60289200) version changed (26) now/next (1)
KEY: 377 TV
KEY: 377 TV
action -> InfobarActions showTv
[SKIN] processing screen ChannelSelection_summary:
KEY: 352 OK
action -> OkCancelActions ok
KEY: 352 OK
action -> OkCancelActions OK
unknown action OkCancelActions/OK! typo in keymap?
action -> OkCancelActions OK
unknown action OkCancelActions/OK! typo in keymap?
[NTP]: setting E2 time: 1446836596.79
KEY: 108 DOWN
KEY: 108 DOWN
KEY: 108 DOWN
KEY: 108 DOWN
KEY: 352 OK
action -> OkCancelActions ok
playing 1:0:1:27EC:806:2:11A0000:0:0:0::STV Scottish West
< 19040.266368> [eDVBCAService] free slot 0 demux 0 for service 1:0:1:2400:7F9:2:11A0000:0:0:0:
< 19040.266631> [eDVBCAService] free service 1:0:1:2400:7F9:2:11A0000:0:0:0:
< 19040.278776> [eDVBServicePlay] timeshift
< 19040.281444> [eDVBServicePlay] timeshift
< 19040.283890> [eTSMPEGDecoder] decoder state: play, vpid=ffffffff, apid=ffffffff
< 19040.284147> [eDVBPCR0] DEMUX_STOP ok
< 19040.284327> [eDVBPCR0] destroy
< 19040.284504> [eDVBVideo0] DEMUX_STOP ok
< 19040.285592> [eDVBVideo0] VIDEO_STOP ok
< 19040.288371> [eDVBVideo0] destroy
< 19040.288494> [eDVBAudio0] AUDIO_STOP ok
< 19040.322250> [eDVBAudio0] DEMUX_STOP ok
< 19040.322353> [eDVBAudio0] AUDIO_CONTINUE ok
< 19040.329161> [eDVBAudio0] destroy
< 19040.329235> [eDVBText0] DEMUX_STOP ok
< 19040.329973> [eDVBText0] destroy
< 19040.333555> [eDVBResourceManager] start release channel timer
getResolvedKey config.usage.remote_fallback failed !! (Typo??)
< 19040.351178> [eDVBServicePlay] timeshift
< 19040.353687> [eDVBServicePlay] timeshift
< 19040.356106> [eDVBServicePlay] timeshift
RemovePopup, id = ZapError
< 19040.359608> [eDVBLocalTimerHandler] remove channel 0x2323ad0
< 19040.359753> [eEPGCache] remove channel 0x2323ad0
< 19040.360423> [eEPGCache] abort caching events !!
< 19040.365164> [eDVBResourceManager] allocate channel.. 0806:0002
< 19040.368813> [eDVBFrontend] (0)tune
< 19040.368980> [eDVBSatelliteEquipmentControl] RotorCmd ffffffff, lastRotorCmd ffffffff
< 19040.369171> [eDVBFrontend] prepare_sat System 0 Freq 10906000 Pol 1 SR 22000000 INV 2 FEC 4 orbpos 282 system 0 modulation 1 pilot 2, rolloff 0
< 19040.369227> [eDVBFrontend] tuning to 1156 mhz
< 19040.369278> [eDVBChannel] OURSTATE: tuning
< 19040.369343> [eDVBServicePMTHandler] allocate Channel: res 0
< 19040.369469> [eDVBCIInterfaces] addPMTHandler 1:0:1:27EC:806:2:11A0000:0:0:0::STV Scottish West
< 19040.369544> [eDVBChannel] getDemux cap=00
< 19040.369591> [eDVBResourceManager] allocate demux cap=00
< 19040.369633> [eDVBResourceManager] allocating demux adapter=0, demux=0, source=0 fesource=0
< 19040.369679> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 19040.378524> [eDVBFrontend] set static current limiting
< 19040.390129> [eDVBServicePlay] timeshift
KEY: 352 OK
< 19040.401514> [eDVBFrontend] invalidate current switch params
< 19040.402324> [eDVBFrontend] setVoltage 1
< 19040.402659> [eDVBFrontend] sleep 10ms
< 19040.412831> [eDVBFrontend] set sequence pos 3
< 19040.413124> [eDVBFrontend] update current switch params
< 19040.413279> [eDVBFrontend] startTuneTimeout 5000
< 19040.413389> [eDVBFrontend] setFrontend 1
< 19040.413448> [eDVBFrontend] setting frontend 0
< 19040.414739> [eDVBFrontend] (0)fe event: status 0, inversion off, m_tuning 1
< 19040.414878> [eDVBFrontend] sleep 500ms
< 19040.647132> [eDVBFrontend] (0)fe event: status 1f, inversion off, m_tuning 2
< 19040.647513> [eDVBChannel] OURSTATE: ok
< 19040.650748> [eDVBLocalTimerHandler] channel 0x21a7b98 running
< 19040.650884> [eDVBChannel] getDemux cap=00
< 19040.650932> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 19040.651147> [eDVBSectionReader] DMX_SET_FILTER pid=20
< 19040.651591> [eEPGCache] channel 0x21a7b98 running
< 19040.651674> [eDVBChannel] getDemux cap=00
< 19040.651818> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 19040.651904> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 19040.651998> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 19040.652382> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 19040.652774> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 19040.652946> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 19040.653115> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 19040.653219> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 19040.653380> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 19040.653546> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 19040.653706> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 19040.653852> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 19040.653995> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 19040.654453> [eEPGCache] next update in 2 sec
< 19040.654654> [eDVBResourceManager] stop release channel timer
< 19040.654732> [eDVBChannel] getDemux cap=00
< 19040.654784> [eDVBServicePMTHandler] ok ... now we start!!
< 19040.654889> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 19040.655096> [eDVBSectionReader] DMX_SET_FILTER pid=0
< 19040.692703> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 19040.692868> [eDVBSectionReader] DMX_SET_FILTER pid=18
RemovePopup, id = ZapError
< 19040.696457> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 19040.696604> [eDVBSectionReader] DMX_SET_FILTER pid=0
< 19040.805091> [eDVBServicePMTHandler] PATready
< 19040.805206> [eDVBServicePMTHandler] use pmtpid 0102 for service_id 27ec
< 19040.805264> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 19040.805356> [eDVBSectionReader] DMX_SET_FILTER pid=258
< 19040.805780> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 19040.805921> [eDVBSectionReader] DMX_SET_FILTER pid=0
< 19040.807835> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 19040.808105> [eDVBSectionReader] DMX_SET_FILTER pid=256
< 19040.808554> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 19040.808678> [eDVBSectionReader] DMX_SET_FILTER pid=17
< 19040.915129> [eDVBFrontend] set dynamic current limiting
< 19040.938232> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 19040.938400> [eDVBSectionReader] DMX_SET_FILTER pid=18
< 19041.010797> [eDVBServicePlay] eventNewProgramInfo timeshift_enabled=0 timeshift_active=0
< 19041.012882> [eDVBServicePlay] have 1 video stream(s) (0d08), and 2 audio stream(s) (0d0a, 0d09), and the pcr pid is 0d08, and the text pid is 0924
< 19041.013201> [eDVBChannel] getDemux cap=01
< 19041.013241> [eDVBResourceManager] allocate demux cap=01
< 19041.013279> [eDVBResourceManager] allocating shared demux adapter=0, demux=0, source=0
< 19041.018609> [eTSMPEGDecoder] decoder state: play, vpid=0d08, apid=0d0a
< 19041.018873> [eDVBPCR0] DMX_SET_PES_FILTER pid=0x0d08 ok
< 19041.018950> [eDVBPCR0] DEMUX_START ok
< 19041.022522> [eDVBAudio0] DMX_SET_PES_FILTER pid=0x0d0a ok
< 19041.022698> [eDVBAudio0] DEMUX_START ok
< 19041.022874> [eDVBAudio0] AUDIO_SET_BYPASS bypass=1 ok
< 19041.029232> [eDVBAudio0] AUDIO_PAUSE ok
< 19041.032305> [eDVBAudio0] AUDIO_PLAY ok
< 19041.038900> [eDVBVideo] Video Device: /dev/dvb/adapter0/video0
< 19041.039190> [eDVBVideo] demux device: /dev/dvb/adapter0/demux0
< 19041.042392> [eDVBVideo0] VIDEO_SET_STREAMTYPE 0 - ok
< 19041.045890> [eDVBVideo0] DMX_SET_PES_FILTER pid=0x0d08 ok
< 19041.045961> [eDVBVideo0] DEMUX_START ok
< 19041.046232> [eDVBVideo0] VIDEO_FREEZE ok
< 19041.049375> [eDVBVideo0] VIDEO_PLAY ok
< 19041.057704> [eDVBText0] DMX_SET_PES_FILTER pid=0x0924 ok
< 19041.057778> [eDVBText0] DEMUX_START ok
< 19041.061460> [eDVBVideo0] VIDEO_SLOWMOTION 0 ok
< 19041.064944> [eDVBVideo0] VIDEO_FAST_FORWARD 0 ok
< 19041.068369> [eDVBVideo0] VIDEO_CONTINUE ok
< 19041.071726> [eDVBAudio0] AUDIO_CONTINUE ok
< 19041.077870> [eDVBTeletextParser] Starting!
< 19041.077927> [eDVBTeletextParser] disable teletext subtitles page ffffffffffffffff (und)
< 19041.077999> [eDVBPESReader] Created. Opening demux
< 19041.078098> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 19041.078215> [eDVBTeletextParser] created teletext subtitle PES reader!
< 19041.078388> [eDVBPESReader] Created. Opening demux
< 19041.078447> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 19041.078576> [eDVBTeletextParser] starting PES reader on pid=0924
< 19041.078637> [eDVBPESReader] DMX_SET_PES_FILTER pid=0924
< 19041.079572> [eDVBServicePlay] timeshift
< 19041.081125> [eDVBServicePlay] timeshift
< 19041.083758> [eDVBServicePlay] timeshift
< 19041.084413> [eDVBServicePlay] timeshift
< 19041.085820> [eDVBServicePlay] timeshift
< 19041.103804> [eDVBCAService] new service 1:0:1:27EC:806:2:11A0000:0:0:0::STV Scottish West
< 19041.103953> [eDVBCAService] add demux 0 to slot 0 service 1:0:1:27EC:806:2:11A0000:0:0:0::STV Scottish West
< 19041.104067> [eDVBCIInterfaces] gotPMT
< 19041.104558> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 19041.104789> [eDVBSectionReader] DMX_SET_FILTER pid=258
< 19041.107105> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 19041.107266> [eDVBSectionReader] DMX_SET_FILTER pid=257
[Dish] tuning failed
< 19041.209056> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 19041.209252> [eDVBSectionReader] DMX_SET_FILTER pid=258
< 19041.410968> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 19041.411167> [eDVBSectionReader] DMX_SET_FILTER pid=263
< 19041.609912> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 19041.610118> [eDVBSectionReader] DMX_SET_FILTER pid=267
< 19041.731394> [eDVBLocalTimerHandler] diff is 1
< 19041.731499> [eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
< 19041.731547> [eDVBLocalTimerHandler] set RTC Time
< 19041.841135> [eDVBLocalTimerHandler] update RTC
< 19041.841252> [eDVBLocalTimerHandler] time update to 19:03:21
< 19041.841295> [eDVBLocalTimerHandler] m_time_difference is 1
< 19041.841323> [eDVBLocalTimerHandler] set Linux Time
< 19041.841756> [eDVBChannel] getDemux cap=00
< 19041.842617> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 19041.842767> [eDVBSectionReader] DMX_SET_FILTER pid=259
< 19042.006129> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 19042.006384> [eDVBSectionReader] DMX_SET_FILTER pid=265
< 19042.080607> [eDVBServicePMTHandler] sdt update done!
< 19042.657863> [eEPGCache] start caching events(1446836602)
< 19042.658092> [eDVBSectionReader] DMX_SET_FILTER pid=3842
< 19042.658525> [eDVBSectionReader] DMX_SET_FILTER pid=3003
< 19042.659052> [eDVBSectionReader] DMX_SET_FILTER pid=18
< 19042.660369> [eDVBSectionReader] DMX_SET_FILTER pid=18
< 19042.661496> [eDVBSectionReader] DMX_SET_FILTER pid=18
< 19042.662922> [eDVBSectionReader] DMX_SET_FILTER pid=700
< 19042.663749> [eDVBSectionReader] DMX_SET_FILTER pid=700
< 19042.664633> [eDVBSectionReader] DMX_SET_FILTER pid=5000
< 19042.665172> [eDVBSectionReader] DMX_SET_FILTER pid=5000
< 19042.666073> [eDVBSectionReader] DMX_SET_FILTER pid=57
[SoftcamManager] mgcamd.1.38 already running
job Components.Task.Job name=SoftcamCheck #tasks=1 completed with [] in None
< 19049.666606> [eEPGCache] abort non avail schedule reading
< 19049.668089> [eEPGCache] abort non avail schedule other reading
< 19049.669267> [eEPGCache] abort non avail virgin nownext reading
< 19049.670523> [eEPGCache] abort non avail virgin schedule reading
< 19049.670943> [eEPGCache] abort non avail netmed schedule reading
< 19049.672300> [eEPGCache] abort non avail netmed schedule other reading
< 19049.672667> [eEPGCache] abort non avail viasat reading
< 19049.709896> [eEPGCache] nownext finished(1446836609)
< 19049.855504> [eEPGCache] FS subtable (60289300) version changed (26) now/next (1)
< 19200.397266> [eEPGCache] FS subtable (601e2300) version changed (4) now/next (1)
< 19203.311965> [eEPGCache] FS subtable (601e2400) version changed (6) now/next (1)
< 19203.531519> [eEPGCache] FS subtable (601e2500) version changed (5) now/next (1)
< 19210.777878> [eEPGCache] FS subtable (601e2500) version changed (7) now/next (1)
[AutoTimer] Auto Poll
[AutoTimer] Auto Poll Started
[AutoTimer] No changes in configuration, won't parse
job Components.Task.Job name=AutoTimer #tasks=0 completed with [] in None
< 19252.257297> [eEPGCache] FS subtable (611e2300) version changed (8) now/next (1)
< 19252.834846> [eEPGCache] FS subtable (611e1e00) version changed (8) now/next (1)
< 19253.670988> [eEPGCache] FS subtable (611e2500) version changed (9) now/next (1)
< 19255.196035> [eEPGCache] FS subtable (60289200) version changed (27) now/next (1)
< 19270.906128> [eEPGCache] FS subtable (601e2300) version changed (7) now/next (1)
[SoftcamManager] mgcamd.1.38 already running
job Components.Task.Job name=SoftcamCheck #tasks=1 completed with [] in None
< 19549.430388> [eEPGCache] FS subtable (611e3200) version changed (5) now/next (1)
< 19563.706097> [eEPGCache] FS subtable (60289500) version changed (11) now/next (1)
< 19585.047886> [eEPGCache] FS subtable (601e3200) version changed (5) now/next (1)
< 19609.929494> [eEPGCache] FS subtable (60289200) version changed (28) now/next (1)
[SoftcamManager] mgcamd.1.38 already running
job Components.Task.Job name=SoftcamCheck #tasks=1 completed with [] in None
< 19767.347130> [eEPGCache] FS subtable (60289300) version changed (27) now/next (1)
< 19941.841897> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 19941.842149> [eDVBSectionReader] DMX_SET_FILTER pid=20
< 19943.400438> [eDVBLocalTimerHandler] diff is 0
< 19943.400566> [eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
< 19943.400637> [eDVBLocalTimerHandler] not changed
< 19943.401266> [eDVBChannel] getDemux cap=00
< 19979.705121> [eEPGCache] FS subtable (6022e400) version changed (12) now/next (1)
< 19980.706776> [eEPGCache] FS subtable (6022e400) version changed (13) now/next (1)
< 20001.970025> [eEPGCache] FS subtable (6122e400) version changed (13) now/next (1)
KEY: 115
action -> GlobalActions volumeUp
< 20039.461600> [eDVBVolumecontrol] Setvolume: raw: 75 75, -1db: 16 16
< 20039.461729> [eDVBVolumecontrol] SetVolume failed to open mixer: Device or resource busy
setValue 75
KEY: 115
KEY: 115
action -> GlobalActions volumeUp
< 20040.619517> [eDVBVolumecontrol] Setvolume: raw: 80 80, -1db: 13 13
< 20040.619644> [eDVBVolumecontrol] SetVolume failed to open mixer: Device or resource busy
setValue 80
KEY: 115
KEY: 115
action -> GlobalActions volumeUp
< 20041.428924> [eDVBVolumecontrol] Setvolume: raw: 85 85, -1db: 10 10
< 20041.429098> [eDVBVolumecontrol] SetVolume failed to open mixer: Device or resource busy
setValue 85
KEY: 115
KEY: 115
action -> GlobalActions volumeUp
< 20042.062729> [eDVBVolumecontrol] Setvolume: raw: 90 90, -1db: 7 7
< 20042.062849> [eDVBVolumecontrol] SetVolume failed to open mixer: Device or resource busy
setValue 90
KEY: 115
KEY: 114
action -> GlobalActions volumeDown
< 20044.024398> [eDVBVolumecontrol] Setvolume: raw: 85 85, -1db: 10 10
< 20044.024530> [eDVBVolumecontrol] SetVolume failed to open mixer: Device or resource busy
setValue 85
KEY: 114
[SoftcamManager] mgcamd.1.38 already running
job Components.Task.Job name=SoftcamCheck #tasks=1 completed with [] in None
< 20222.160629> [eEPGCache] FS subtable (60288f00) version changed (22) now/next (1)
KEY: 115
action -> GlobalActions volumeUp
< 20360.871696> [eDVBVolumecontrol] Setvolume: raw: 90 90, -1db: 7 7
< 20360.871817> [eDVBVolumecontrol] SetVolume failed to open mixer: Device or resource busy
setValue 90
KEY: 115
KEY: 115
action -> GlobalActions volumeUp
< 20361.354382> [eDVBVolumecontrol] Setvolume: raw: 95 95, -1db: 4 4
< 20361.354502> [eDVBVolumecontrol] SetVolume failed to open mixer: Device or resource busy
setValue 95
KEY: 115
Traceback (most recent call last):
File "/usr/lib/enigma2/python/Plugins/SystemPlugins/ViX/SoftcamManager.py", line 548, in softcam_check
IOError: [Errno 2] No such file or directory: '/tmp/cam.check.log'
< 20487.111287> [ePyObject] (CallObject(<bound method SoftcamAutoPoller.softcam_check of <Plugins.SystemPlugins.ViX.SoftcamManager.SoftcamAutoPoller instance at 0x67585288>>,()) failed)
]]>
</enigma2crashlog>
</crashlogs>
</openvix>

 

[bbbuk]

...Just out of interest im with virgin media for bb, what about everyone else who had the issue? I am convinced it is something to do with network..

I don't use VM for my bb. My bb or router/network hasn't changed.

 

[roybach]

Other brand? other drivers? other chipsets?

I agree peterj, but then wouldn't that mean all other LX2 would be similarly affected? This problem has now evolved from when I first posted regarding the issue a couple of weeks ago, and the only other post with the same problem that I recall was someone with a VU+duo and I don't know if he got it fixed either. I would like to reiterate what I said in post #39 and all the things currently being advised I have done /tried and it didn't achieve the desired result . The only thing mentioned that I didn't try was leaving the network cable out for 24hrs. but I would love to know how that resolves the problem , but having said that W.o.S. claim that they now have my LX2 stable connected to their network which may mean that the intervening period when it wasn't connected to a network was what's required.

 

[jameschapmanbutchers]

I have a suspicion that its to do with the Blue Skin. ive successfully ran a few Vu solo2 with basic skin and not one error and even
trying to force the error. so to make sure I loaded the blue skin and within 30 mins crashed.

it kind of makes sense as when I go right back to a april version to rule out images, it was still happening. some food for though.

reflash with latest and keep the standard default skin and see how you go..

 

[Sicilian]

I have a suspicion that its to do with the Blue Skin. ive successfully ran a few Vu solo2 with basic skin and not one error and even
trying to force the error. so to make sure I loaded the blue skin and within 30 mins crashed.

it kind of makes sense as when I go right back to a april version to rule out images, it was still happening. some food for though.

reflash with latest and keep the standard default skin and see how you go..

It's not the skin. It's network related. Am I remembering right you are using a VM Superhub? Can you try the following:

1) If your receiver is using DHCP, set it to a static IP.

2) If you still get the crash after point 1, are you able to set the VM Hub to modem only mode, then use another router? If not can you put a network switch inline?

 

[jameschapmanbutchers]

I'm using a BT Infinity hub Boss.

 

[Sicilian]

I'm using a BT Infinity hub Boss.

Do you have a spare router lying around that you can connect to the BT Modem, instead of their Hub?

First try a static IP in the receiver though. Menu > Setup > System > Network > Apapter settings. Assign a static IP. First though check in the BT Hub what range of IP address's are assigned to DHCP. Make sure you static IP is outside the DHCP range the BT Hub uses.

 

[kill_bill]

Right, crashed after an hour last night but couldn't get logs. Reflashed and been on since 9pm last night and no errors. Shall I try adding plugins, cams etc and see?

 

[Huevos]

crashed after an hour last night but couldn't get logs.

Why couldn't you get the logs?

USB stick formatted FAT32. Set up debug log to save on the USB stick. If the box crashes, put the USB stick in your PC and get the log.

 

[kill_bill]

It's alright saying that now but I left it as default which is internal flash, when it crashed I couldn't access via FTP so had to reflash. Will add softcam initially and see how it goes