OpenViX 6.3 Released! Support/discussion thread

[Huevos]

Thread for questions about the new OpenViX version 6.3.

 

[bellejt]

release notes ?

 

[Huevos]

release notes ?

This is the discussion thread. The release notes are in the sticky. https://www.world-of-satellite.com/showthread.php?65693-OpenViX-6-3-Released!

 

[Orlandox]

Hello,

'Help Screen' in english only. Anyway to solve this localization problem ?

 

[Huevos]

I though you had already solved this with the recent commit. Will have to have a look.

You mean the Help Screen or the MessageBox text?

 

[Orlandox]

Hello,

when you press 'Help' button twice ( you get 7 lines ). I just installed 6.3.001 to my other box (Vu+ Uno 4K SE) and used mo-to-po converter. Then searched text 'Help Screen' and it doesn't exist at that file so when system is creating mo-file from po-file, it is skipping those 7 lines. That is the problem ! When I save the po-file with Poedit it is okay and 'Help Screen' is in finnish.

msgid ""
"Help Screen\n"
"\n"
"Brief help information for buttons in your current context.\n"
"\n"
"Navigate up/down with UP/DOWN buttons and page up/down with LEFT/RIGHT. EXIT to return to the help screen. OK to perform the action described in the currently highlighted help.\n"
"\n"
"Other buttons will jump to the help for that button, if there is help.\n"
"\n"
"If an action is user-configurable, its help entry will be flagged (C)\n"
"\n"
"A highlight on the remote control image shows which button the help refers to. If more than one button performs the indicated function, more than one highlight will be shown. Text below the list indicates whether the function is for a long press of the button(s).\n"
"\n"
"The order and grouping of the help information list can be controlled using MENU>Setup>User Interface>Settings>Sort order for help screen."
msgstr ""
"Ohjenäyttö\n"
"\n"
"Nappäinten lyhyet ohjetiedot nykyisessä kontekstissäsi.\n"
"\n"
"Navigoi ylös/alas YLÖS/ALAS -näppäimillä ja sivu ylös/alas VASEN/OIKEA -näppäimillä. EXIT-näppäimellä paluu ohjenäytölle. OK-näppäimellä suoritetaan toiminto, joka on kuvattu korostetulla rivillä.\n"
"\n"
"Muilla näppäimillä hypätään kyseisen näppäimen ohjeeseen, jos sellainen on olemassa.\n"
"\n"
"Jos toiminto on käyttäjän määriteltävissä, sen merkkinä on (M)\n"
"\n"
"Korostus kaukosäätimen kuvassa näyttää mihin ohje viittaa. Jos useampi näppäin suorittaa korostetun toiminnon, niin usempi korostus näytetään. Teksti kuvan alla näyttää tarvitaanko näppäimen/näppäinten pitkä painallus.\n"
"\n"
"Ohjetietolistan järjestys ja ryhmittely voidaan määrittää kohdassa Päävalikko/Asetukset/Käyttöliittymä/Asetukset> Ohjenäytön lajittelujärjestys."

 

[bellejt]

thx did not find it

 

[maxben]

Any reason for this ?

root@mutant51:~# opkg install openvpnInstalling openvpn (2.5.8) on root.
Downloading http://www.openvix.co.uk/feeds/openvix/release/6.3/hd51/cortexa15hf-neon-vfpv4/openvpn_2.5.8-r0_cortexa15hf-neon-vfpv4.ipk.
Configuring openvpn.
 Adding system startup for /etc/init.d/openvpn.
Starting openvpn: client.
depmod: WARNING: could not open modules.builtin.modinfo at /lib/modules/4.10.12: No such file or directory

 

[BrianG61UK]

For oscam-latest running using Softcam Script the correct place for configuration files now seems to be /var/tuxbox/config/oscam-trunk/ rather than /var/tuxbox/config/oscam-latest/.
Is that correct?

 

[Huevos]

Any reason for this ?

root@mutant51:~# opkg install openvpnInstalling openvpn (2.5.8) on root.
Downloading http://www.openvix.co.uk/feeds/openvix/release/6.3/hd51/cortexa15hf-neon-vfpv4/openvpn_2.5.8-r0_cortexa15hf-neon-vfpv4.ipk.
Configuring openvpn.
 Adding system startup for /etc/init.d/openvpn.
Starting openvpn: client.
depmod: WARNING: could not open modules.builtin.modinfo at /lib/modules/4.10.12: No such file or directory

What box is it? Does openvpn start?

 

[twol]

For oscam-latest running using Softcam Script the correct place for configuration files now seems to be /var/tuxbox/config/oscam-trunk/ rather than /var/tuxbox/config/oscam-latest/.
Is that correct?

Should be the oscam you are using

 

[BrianG61UK]

Should be the oscam you are using

I'm using oscam-latest.

The only option showing for Softcam Script is oscam-trunk.

 

[maxben]

What box is it? Does openvpn start?

As it says HD51 and no it doesn't start.

 

[twol]

I'm using oscam-latest.

The only option showing for Softcam Script is oscam-trunk.

I have just checked the oscam ipk,s and they are fine.
When you backup, do you have /etc/tuxbox/config selected ? - check with menu/choose files.
In the meantime if you remove & restore it should restore the script & config files- just backup the config files before you remove

 

[Huevos]

Hello,

when you press 'Help' button twice ( you get 7 lines ). I just installed 6.3.001 to my other box (Vu+ Uno 4K SE) and used mo-to-po converter. Then searched text 'Help Screen' and it doesn't exist at that file so when system is creating mo-file from po-file, it is skipping those 7 lines. That is the problem ! When I save the po-file with Poedit it is okay and 'Help Screen' is in finnish.

msgid ""
"Help Screen\n"
"\n"
"Brief help information for buttons in your current context.\n"
"\n"
"Navigate up/down with UP/DOWN buttons and page up/down with LEFT/RIGHT. EXIT to return to the help screen. OK to perform the action described in the currently highlighted help.\n"
"\n"
"Other buttons will jump to the help for that button, if there is help.\n"
"\n"
"If an action is user-configurable, its help entry will be flagged (C)\n"
"\n"
"A highlight on the remote control image shows which button the help refers to. If more than one button performs the indicated function, more than one highlight will be shown. Text below the list indicates whether the function is for a long press of the button(s).\n"
"\n"
"The order and grouping of the help information list can be controlled using MENU>Setup>User Interface>Settings>Sort order for help screen."
msgstr ""
"Ohjenäyttö\n"
"\n"
"Nappäinten lyhyet ohjetiedot nykyisessä kontekstissäsi.\n"
"\n"
"Navigoi ylös/alas YLÖS/ALAS -näppäimillä ja sivu ylös/alas VASEN/OIKEA -näppäimillä. EXIT-näppäimellä paluu ohjenäytölle. OK-näppäimellä suoritetaan toiminto, joka on kuvattu korostetulla rivillä.\n"
"\n"
"Muilla näppäimillä hypätään kyseisen näppäimen ohjeeseen, jos sellainen on olemassa.\n"
"\n"
"Jos toiminto on käyttäjän määriteltävissä, sen merkkinä on (M)\n"
"\n"
"Korostus kaukosäätimen kuvassa näyttää mihin ohje viittaa. Jos useampi näppäin suorittaa korostetun toiminnon, niin usempi korostus näytetään. Teksti kuvan alla näyttää tarvitaanko näppäimen/näppäinten pitkä painallus.\n"
"\n"
"Ohjetietolistan järjestys ja ryhmittely voidaan määrittää kohdassa Päävalikko/Asetukset/Käyttöliittymä/Asetukset> Ohjenäytön lajittelujärjestys."

I just checked the *.po in the build and those strings are empty in the fi.po. In nl.po they are populated.
https://www.openvix.co.uk/feeds/ope...ma2-po_6.3+git26171+464bd86-r0_vuultimo4k.ipk

The po is in that file.

Looks like this:

msgid "Brief help information for buttons in your current context."
msgstr ""

No idea why you have got one big long string but that is not how it is, neither in HelpMenu.py nor in the *.po.

I have committed the current fi.po from the build. There are fuzzies and empty strings, which is maybe why there are problems, because this is the version the *.mo is based on.
https://github.com/OpenViX/enigma2/commit/9dc33716708e993e492862634946205432b39b08

 

[Orlandox]

Thank you @Huevos,

I will check it, tweak it and then make a PR.

 

[darog69]

Hello, initialization of the Cam CI module does not work correctly, Caid cannot be assigned.
Tuner VuUltimo 4k OpenViX 6.3x

 

[Huevos]

Hello, initialization of the Cam CI module does not work correctly, Caid cannot be assigned.
Tuner VuUltimo 4k OpenViX 6.3x

And this was working in previous version? You need to provide more info, and the logs of it working properly in the previous version and not now.

 

[darog69]

In OpenViX version 6.2.011 it doesn't work either



It is not possible to assign any Caid to module tasks
it should be like Open ATV 7.2

 

[Huevos]

In OpenViX version 6.2.011 it doesn't work either

View attachment 64586

It is not possible to assign any Caid to module tasks

So when did you last have this working? What were using before.