Please post your working brand of internal SATA HDD and size

[notanotherone]

i have a Samsung HD103SJ SpinPoint F3 1TB 7200RPM SATA II 3GB/s 32MB Cache OEM

 

[sooty]

@ notanotherone
How do you find the samsung hdd? I was thinking of getting the same, any issues with it?
Thanks

 

[andyblac]

@ notanotherone
How do you find the samsung hdd? I was thinking of getting the same, any issues with it?
Thanks

i have the SpinPiont F1 1tb all fine here.

 

[pathfinder]

I've just installed a Samsung 500GB Model # HD502HJ. Working great.

 

[cbr900]

Hi...

I have a dreambox7000 with samsung 120GB hhd (5400 rev) installed and have these problems:
1- When the hdd in sleep mode and started a recording the receiver will hangs/few breaks in picture for few seconds then it will record.
2- hdd noise.

Currently, I am using a usb memory 4GB for recordings with my VU+DOU.

Now, my question:
Does VU+ has these problems? and what is the best hdd to use?

thx

 

[Sicilian]

1- When the hdd in sleep mode and started a recording the receiver will hangs/few breaks in picture for few seconds then it will record.

Not experianced that with my VU+ Duo

2- hdd noise.

Depends on HDD installed. Mine is quite.

Does VU+ has these problems? and what is the best hdd to use?

thx

Look at the first post in this thread

 

[cbr900]

Not experianced that with my VU+ Duo

Do you agree that the initial moment the receiver starts recording in usb memory or starts recording in hdd will be the same (no few breaks in picture or slight hang?

 

[pooface]

If the hdd is in standby, there will be a brief moment where the programme does not record, depending on the startup time of the hdd. The programme is shown on the tv as normal. This does not happen if you have the hdd set to not go to standby, or you record to a usb memory stick...

Also, on recordings (think it happens on both usb memory stick and sata hdd), there is some period of time where there is no sound that shows. This is a problem in the player as far as I am aware...

 

[aix]

what is the best hdd to use?

The first post in this thread gives a list of working drives. I personally am using a 2TB Samsung drive (F3 EcoGreen 2TB 32MB 5400RPM SATA-II), which works well, is quiet and cost me under £85 delivered.

 

[parkher]

1 TB Samsung SpinPoint EcoGreen F2 HD103SI

It is a 5400 rpm drive. Perhaps I would have chosen 7200 rpm, but the new drives lying around at my home were all 5400 rpm, mostly 1.5 TB but I found a couple of 1 TB.
That is because I am using them as external eSATA or USB drives instead of blank DVDs, fill them up and put on a shelf, and 5400 rpm run colder (important for external).

 

[jrbmw]

using a 500gb maxtor one touch plugged into one of the back usb ports

regards jrbmw

 

[SLOTH]

fully working ...samsung spinpoint HD 502HJ ...yay

 

[wobbler]

Using a 2.0TB Samsung HD203WI SATAII 5400rpm 32MB cache.
Was internal so qualifies, but is currently connected via eSata so I can keep a better eye on any temperature problems.

I have noticed that the drive gets powered down when the box is in standby, but when the box is put into deep standby, the drive stays spinning and I have to power it off manually. Does anyone else get this strange occurrence ?
I am using a PLI image from the end of May.

 

[Mr.McGee]

Seagate Barracuda 7200.12 ST3500418AS 500GB 7200 RPM 16MB

Working.

 

[grtmoby]

can we have the model number McGee, easier as a reference for others

 

[Mr.McGee]

Updated my post

 

[rayal]

just installed a Samsung Spinpoint F3 (EcoGreen) 2TB Hard Drive SATAII 5400rpm 32MB Cache, works fine nice and quiet.

 

[cbr900]

What are the benefits (if any) of getting a hhd with a 64mb cache compared to a lower cache?

 

[grtmoby]

in the duo there is not much benefit of the 64mb cache over the 32 or 16 ones.

it might give a small leap in performance when it comes to other applications and games in a pc but not here

 

[paco68]

WesternDigital 800Gb WD8000AARS, working great with VTi image v2.0
First I Formated with Windows7 to NTFS and copy all my previously recorded videos by DM7020 and a lot of mkv movies .
Than installed in Vu+ and run the following commands on telnet:
first :
umount /mnt/hdd
and than :
mount -t ntfs-3g /dev/sda1 /mnt/hdd/
and now read and write perfectly