When was the lat time you initialized your HDD? Did you initialize when you flashed fresh with VIX? Did you initialize your USB stick with VIX?
Superb quality and spec AB-Com PULSe 4K SE. Crazy offer! Only £129! FREE UK DELIVERY! 4K UHD, Enigma 2, Multiboot 4 images & more!...
Superb quality and spec AB-Com PULSe 4K Rev II Twin Satellite tuner only £179! FREE UK DELIVERY! 4K UHD, Enigma 2, SATA HDD facility, Multiboot 4 images & more!...
When was the lat time you initialized your HDD? Did you initialize when you flashed fresh with VIX? Did you initialize your USB stick with VIX?
I was unable to get the logs as I ended up installing black hole by mistake. However on a fresh install I can't get the box to boot without having to use the USB with image on it, it just seems to hang.
Sent from my iPad using Tapatalk HD
Sent from my iPad using Tapatalk HD
L
lynd145
Guest
hi all it seems to be sumthin to do with epg on usb. since ive takin my usb out of the stb and saved my epg to hdd its been rock solid i tried all sorts to solve it reinstall init hdd and usb and removed hdd and only when i removed the usb pendrive did the crashes stop hope this helps and bear with the vix team as there support is better than all the rest ive been at this game for a long time and this is the best support about by a country mile THANKS
S
spacemonkey
Guest
i have the same issue on two Duo, no usb devices HDD (SATA DOM) formatted to EXT4
E
edogg
Guest
hi my vu +duo vix 2.3(204) froze again last night while watching one recording another one started when it came to the end of the one i was watching it became unresponsive to the remote I had set the new recording to go into deep standby after the recording but it recorded 280 minutes instead of the 55mins the program was on for
enigma2_crash_1331090180.log was sent quote 1331107185.3
I am using the automatic sound adjustment plugin and rats DW channel updater
pts is set but recordings have priorty
I have a 500gb internal ex sky hdd
epg is in internalflash and is crossepg opentv 28.2
I use rats bouquets
I did a factory reset before doing a fresh install
no scan was done i just installed the bouquet
enigma2_crash_1331090180.log was sent quote 1331107185.3
I am using the automatic sound adjustment plugin and rats DW channel updater
pts is set but recordings have priorty
I have a 500gb internal ex sky hdd
epg is in internalflash and is crossepg opentv 28.2
I use rats bouquets
I did a factory reset before doing a fresh install
no scan was done i just installed the bouquet
Thats one mistake straight away, its not recommend to store EPG in flash.
To be quite honest here, too many people find it easy to blame VIX instead of checking out their setup for mistakes.
Last 4 days I've been hammering a Duo trying replicate half of whats been mentioned in this thread to no avail.
My setup: -
Fresh flash of VIX.
Installed no extra plugins only a single softcam.
Initialize HDD straight away. Menu > Setup > System > Hard disk > Initialize. Then press blue button to view progress. Once complete check in Mount manager that the HDD is mounted to /media/hdd and reboot.
Setup bouquets.
Setup EPG as pere her http://www.world-of-satellite.com/showthread.php?14373-How-to-setup-Crossepg-in-all-ViX-Images Only set to use OpenTV 28.2 and Rytec Italy through XEPGDB sources. All EPG settings left as default apart from whats stated in the guide.
EPG set to store on HDD.
Timeshift enabled.
Picons stored on HDD ( DO NOT STORE PICONS ON HDD UNLESS YOU HAVE TIMESHIFT ENABLED).
I've had numerous recordings enabled, used live rewind etc..., had zero issues. I set the Duo recording 3x HD channels while watching a third! Everything been 100% perfect.
From this morning I've change my setup for further testing: -
Added a Kingston 16GB G3 USB Stick. Inititialized the USB stick in the Duo itself so its EXT4. Then mounted to /media/USB.
Moved Picons to USB stick.
EPG now stored to USB stick.
Timeshift now set to /media/usb/timeshift (I created the timeshift directory in USB stick root). Note this can be problematic due to the speed of USB drives, but I'm going to test again anyway.
HDD now only used for recordings.
Again I say anyone having issues do the following: -
Fresh flash.
Re-initialize your HDD and any connected USB sticks, once initialized check they are mounted correctly in Mount Manager. Blue button > VIX > Mount manager and REBOOT.
Transfer settings and bouquets pack and re-scan used satellites by performing a single satellite scan and setting clear before scan to yes.
Setup Crossepg as per here http://www.world-of-satellite.com/showthread.php?14373-How-to-setup-Crossepg-in-all-ViX-Images DO NOT STORE EPG TO FLASH AND ONLY SELECT EPG SOURCE THAT YOU WILL ACTUALLY USE! TOO MANY SOURCES WILL GIVE YOU MEMORY ISSUES!
Place picons on USB not HDD stick unless you have enabled timeshift to your HDD.
Too many users are just jumping on the band wagon in this thread instead of looking at their setup and what they have installed. I've tried for days to replicate some of these issues.
L
lynd145
Guest
i think the biggest problem is peeps store to much epg data which is creating a big problem with memory but i can say though this seems to be more down to latest drivers not image as i never had a issue b4 but i got there in the end by just trying different things and.i just wished i could of gone back to the older drivers
More info regards Crossepg: -
Running CrossEPG in flash will fill it up verry quickly and cause MAJOR issues, as even just using 28.2 as a data source can will use 60mb on first data pull, and grow each day, one of my receivers just using 28.2 is currently 102mb (this is the CrossEPG database NOT the epg.dat file).
Running CrossEPG in flash will fill it up verry quickly and cause MAJOR issues, as even just using 28.2 as a data source can will use 60mb on first data pull, and grow each day, one of my receivers just using 28.2 is currently 102mb (this is the CrossEPG database NOT the epg.dat file).
B
b4ndit74
Guest
Hi, if i reInitialize the hdd to try and stop playback freezes of recordings, it says all data on hdd will be wiped, does that mean ill lose all my recordings ? ive made a backup image as well.
Thanks
Thanks
Yes, all data will be lost so backup your data first.
B
b4ndit74
Guest
Thanks for that, I presume vix image and all the file system will still be on the hdd.
The VIX image is on flash memory built into the motherboard of your receiver, not the HDD.
E
edogg
Guest
I last initialized my hdd when i did the install I have not initialized the usb because it was fat 32 and i only had picons on it but this image kept un-mounting the usb stick causing the box to crash when i changed channel
E
edogg
Guest
I do not have usb sticks connected because they keep being un-mounted causing even more crashes and i repeat i never had these problems with 2.1 or 2.3 until the kernel update yesterday i had 3 freezes and 2 crashes for which i have sent the logs i have now moved the epg to the hdd where should i store the picons because i only put them where they are installed using the install picons from the menu plugins download plugins
B
b4ndit74
Guest
Should I backup the entire hdd b4 initialising, Thanks :thumbsup:
bassethound
Forum Supporter ,
Yes backup your hard drive if you are going to initialize it as the process will wipe the whole HDD
B
b4ndit74
Guest
Should a message appear on the duo once its finished initialising the hdd ?
Ta
Ta
From live TV press Blue button and you will see the progress there. If you select the progress and press OK you will get the job view window that will tell you once complete.
E
edogg
Guest
ok lets hope this has cured it now i have done as instructed new flash re-initialised usb and hdd but i now do not have picons showing even though i have ftp'ed them onto the ext4 usb
Similar threads
